h
h
DC
24V
HANDLING:
CAUTION:
Do not install VARDAflex LED strips in a suspended way!
300 mm
light emitting surface
light emitting surface
light emitting surface
light emitting surface
light emitting surface
IP68
power supply
24 V power supply with
constant voltage output
power/m
15 W
current strength/m
0.625 A
quantity LED/m
60
LED spacing
16.67 mm
dimension of segments
166.67 mm, 10 LEDs
length
maximum 10 meters per connection
for static colours
maximum 15 meters per connection
for dynamic running light
dimensions
166.67* x 11.5 x 21 mm
bending diameter
min. 120 mm
temperature range
-40° C to +55° C
processing temperature
+10° C to +55° C
Manual
Platin SVQ
RGBW-3000 K DMX Six
IMPORTANT INSTALLATION INSTRUCTIONS:
1. Be sure to have a professional electrician complete installation.
There is no warranty coverage for any lights installed without ob-
serving european safety directives.
2. Switch off voltage prior to installation. Ensure that voltage cannot
be accidentally switched on again.
3. VARDAFLEX LED strips is suitability for direct mounting on normal
flammable surfaces, e. g. on wood and wood-based materials with
more than 2 mm thickness.
4. Before turning the power on, check all connections for correctness
and short-circuit.
5. Never operate the LED strips when rolled up.
6. Please make sure that an appropriate flex cross-section for the
connection between LED strip and controller is used.
7. Do not exceed the operating temperature of +55° C.
8. Please do not carry out any repairs yourself. Failure to comply may
lead to voiding of the manufacturer's guarantee.
TECHNICAL DATA:
* Section length | module
NOTICE:
This product contains a light source of energy efficiency class: G.
ø 120 mm
