IU 686 / 0311
9
TowerFeed
T M
for the HP LaserJet 4200 / 4300
INSTALLATION
With stacker
•
Connect stacker and TowerFeed with the provided data cable (Fig.
10 b): one end with the stacker and the other end with the
TowerFeed port. The data communication between TowerFeed
and printer takes place via stacker.
Note: The adapter will not be needed in this configuration.
•
Connect the power cables to printer and TowerFeed.
Abb.10 a
Detail view of data cabel positioning
Adapter
Note:
Power ON the TowerFeed befor or simultaneously with the printer.
Caution:
When rolling TowerFeed to another place, take care when crossing
doorsteps to not tipping the unit.
To prevent tillting of the unit, do transport the TowerFeed only with
closed trays
,
without printer
and without stacker
on its wheel.
Secure trays against opening for transport.
Fig. 10 b
Cabel position on unit with stacker
and position of the power switches
Power switches
