Ruud Heating, Cooling and Water Heating
3
Accessories
■
Outdoor Thermostats
—
RXPT-A01—One outdoor thermostat in box.
RXPT-A02—One outdoor thermostat for mounting in box for use
with RXPT-A01 or A03.
RXPT-A03—One outdoor thermostat with emergency Heat Relay
wired and mounted in box.
RXPT-A04—Two outdoor thermostats with emergency Heat Relay
wired and mounted in box.
■
Thermostats
s
■
Blower Time Delay Control
—RXMD-C06.
■
Fossil Fuel Kits
—Not required. See Ruud Thermostats Specification
Sheet (T22-001).
■
Low Ambient Control
—Cycles outdoor fan to maintain adequate
condensing pressures assuring liquid refrigerant flow to the coil.
Allows low temperature operation in the cooling cycle down to 0°F
[-17.8°C] outdoor temperature. It is recommended that this control be
installed in units to be operated at outdoor ambient temperatures
under 70°F [21°C] (Model No. RXAD-A08)
U
P
R
L
024
J
E
Z
RUUD
REMOTE
HEAT PUMP
EFFICIENCY
16 SEER
DESIGN
SERIES
R-410A
ELECTRICAL
DESIGNATION
J = 208/230V-1-6
Ø
VARIATIONS
E = EQUIPPED
WITH THE
COMFORT
CONTROL SYSTEM
™
COOLING
CONNECTION
FITTING
Z = SWEAT W/SCROLL
COOLING
CAPACITY
024 = 24,000 BTU/HR [7.03 kW]
036 = 36,000 BTU/HR [10.55 kW]
048 = 48,000 BTU/HR [14.07 kW]
060 = 60,000 BTU/HR [17.58 kW]
—
Model Number Identification
[
] Designates Metric Conversions
For all season home comfort, performance and energy conservation, choose a Ruud
Ultra Series™
UPRL- JEZ Series Heat Pump and
with an UHPL- Series Air Handler.
More than a reverse cycle air conditioner, it’s a specially designed combination Winter/Summer comfort system using an indoor coil for
heating and cooling.
To choose an UHPL- Air Handler designed for use with the UPRL- JEZ Heat Pump, refer to the Performance Data Tables and/or the air
handler specification sheet.
Ruud Heat Pump System
NOTE: Requires “3 Heat/2 Cool” thermostat for Maximum Comfort.
