HEAVY DUTY
SOD CUTTER
19
DOG WHEEL CHAIN REPLACEMENT
1. Disconnect metering wheel lever from metering wheel arm.
2. Remove the four screws securing the dog wheel assembly to cut-off case.
3. Remove the screw and washers securing the dog wheel.
4. Move dog wheel towards small sprocket to loosen chain for service.
5. Install new chain. Re-assemble dog wheel assembly and mount it back onto the cut-off case.
WHEEL DRIVE CHAIN REPLACEMENT
1. Raise unit and place on adequate supports.
2. Remove cover from gear case. Rotate drive
wheels until master link
3
is on top of upper
sprocket.
3. Remove snap ring
1
from groove on shaft and
slide gear
2
toward the outside of the unit.
4. Connect new chain to old chain with master link
and rotate drive wheels until master link is back
on top of upper sprocket. Remove old chain and
connect new chain with a new master link.
5. Slide gear back into position and secure with
snap ring.
6. Replace gear case cover.
BELT / CHAIN REPLACEMENT
Summary of Contents for 544853G
Page 2: ......
