EasyLED Spotlight Plus - Operating Instructions
PI_69
5/10
or flammable light absorbing materials. To avoid such thermal damage and the potential danger of
fire or burns, please adhere to the following instructions:
x
Never cover up the EasyLED Spotlight Plus System (danger of fire!)
x
Never cover up the light emitting aperture of the spotlights with your hands or other parts of your
body (danger of burns!)
x
When illuminating heat sensitive or flammable light absorbing objects, special care must be taken
to keep an appropriate distance and select a suitable brightness level in order to avoid thermal
damage to the object.
x
All spotlights not being used in the working procedure must always be a safe distance – at least
10 cm – away from heat sensitive or flammable light absorbing materials (prevention of possible
fire hazard). Care must, therefore, be taken that these spotlights are at the above mentioned safe
distance away from, for example, dark/coloured textiles and dark/coloured wooden or plastic
surfaces
x
To avoid unnecessary strain on biological tissue by illuminating with visible light, reduce the
brightness and duration of illumination to the absolute minimum level required.
Please make sure that your EasyLED Spotlight Plus System is operated at the
voltage indicated on the rating plate (8).
i
The EasyLED Spotlight Plus System has been developed for operation in dry rooms only (see
Point 6 "Technical data").
i
The instrument must not be used in explosive areas.
i
Safe disconnection from the power supply is only guaranteed by pulling out the mains plug.
i
The instrument may neither be opened nor dismantled. Technical modifications are forbidden.
Repairs must only be carried out by the manufacturer or by its authorised customer service
agencies.
i
Please ensure that every user of the system has quick access to these operating instructions.
i
The manufacturer is not liable for damage caused by failure to obey these instructions.
