INTRODUCTION
Axio Lab.A1
Notes on warranty
Carl Zeiss
04/2013 430037-7144-001
13
DIN EN 894-1:
Ergonomic requirements for the design of displays and control actuators – Part 1:
General principles for human interaction with displays and control actuators
DIN EN 894-3:
Ergonomic requirements for the design of displays and control actuators – Part 3:
Control
actuators
DIN EN 62079:
Preparation of instructions – Structuring, content and presentation
DIN EN ISO 7250:
Basic human body measurements for technological design
DIN EN ISO 14738: Safety of machinery – Anthropometric requirements for the design of
workstations
at
machinery
ISO 11226:
Ergonomics – Evaluation of static working postures
SEMI S8-0307:
Safety guidelines for ergonomics engineering of semiconductor manufacturing
equipment
For a further explanation of TÜV certificate of ergonomics and basic ergonomic setting and operation of
the Axio Lab.A1 microscope please refer to Section 3.5.
1.3
Notes on warranty
The manufacturer guarantees that the instrument has no material or production defects when delivered.
Any defects occurring must be reported without delay; every effort must be made to minimize damage.
Once a defect has been notified, the manufacturer shall have the right to choose whether to repair the
instrument or deliver a replacement in perfect condition. No warranty is provided for normal attrition (in
particular of wearing parts) or improper use.
The instrument manufacturer shall not be liable for damage caused by faulty operation, negligence or
any other tampering with the instrument, particularly the removal or replacement of instrument
components, or the use of accessories from other manufacturers. Such actions will render any warranty
claims invalid.
With the exception of the work specified in this manual, no maintenance or repair of microscopes may be
carried out. Repairs are only to be performed by Carl Zeiss service or personnel specifically authorized by
Carl Zeiss. Should a malfunction of the instrument occur, please contact the Carl Zeiss Microscopy Service
in Germany (see page 112) or the responsible Carl Zeiss representative abroad.