START-UP
Axio Lab.A1
Installing standard components
Carl Zeiss
04/2013 430037-7144-001
59
x
Check that the lighting unit is seated correctly
and insert the plug (Fig. 3-19/
2
) onto the pins
of the lighting unit (Fig. 3-19/
1
). Ensure that it
engages properly to avoid bending the pins.
x
Insert the cable of the lamp plug into the stand
so that it is not damaged when the cover is
mounted.
x
Insert the lower edge of the cover (Fig. 3-16/
2
)
into the retaining channels (Fig. 3-17/
4
) of the
stand and swing upwards until the clamping
jaw (Fig. 3-16/
1
) locks in.
x
Reconnect the power cord.
Fig. 3-19
Attaching condenser
