SAFETY INFORMATION
The following warning symbols appear throughout this assembly manual and indicate the
appropriate safety measures you should take when assembly and operating the lawnmower.
This symbol indicates there is a danger of serious personal injury or death if you do not
observe the warning.
This symbol indicates that there is a danger of damaging your hands if you do not wear
thick, hard wearing gloves.
WARNING!
Keep this assembly manual in a safe place following assembly for reference
at a later date.
WARNING!
Always ensure anyone intending to operate this lawnmower is fully conversant
with the contents of this assembly manual prior to assembling, maintaining or operating
the lawnmower.
WARNING!
Perform assembly operations as described in this manual. Failure to observe
this warning may lead to serious injury, death, or damage to the lawnmower.
WARNING!
Always take care when removing the packaging to prevent damage to you or
to the lawnmower.
IMP ORTANT!
Before assembling the lawnmower, check all the parts indicated in the
manual are in the box. Inspect all the parts for signs of damage. Do not assemble the
lawnmower if you observe any damaged components.
NOTE !
This lawnmower complies with the Noise Emission Directive 2000/14/EC.
WARNING!
Only operate the lawnmower if you are wearing the correct Personal Protective
Equipment (PPE) as described in the following warnings.
WARNING!
Always wear suitable gloves when operating lawnmower to protect your hands
SAFETY INFORMATION
Warning Symbols
The following warning symbols appear throughout this manual and indicate the appropriate
safetymeasures you should take when operating and maintaining the lawnmower.
Read instruction handbook before operating this machine.
Keep bystanders away.
Beware of sharp blades- remove spark plug lead before maintenance.
No naked flames.
Appropriate ear, eye, and head protection must be worn.
Hot surfaces will burn fingers or palms.
Warning! The lawnmower exhaust gas contains toxic substances.
Do not run the engine in closed or poorly ventilated areas.
Blade continues to rotate for a period after the machine is switched off. Do not touch the
blade until all the machine components have been stopped completely.
1
2
Helpline: 0844 856 0793
Email: support@coreservice.co.uk
Website: www.coreservice.co.uk
Helpline: 0844 856 0793
Email: support@coreservice.co.uk
Website: www.coreservice.co.uk
