background image

8

ASSEMBLY

UNPACKINg

This product has been shipped completely assembled.

  Carefully remove the product and any accessories from 

the box. Make sure that all items listed in the packing list 
are included.

  Inspect the product carefully to make sure no breakage 

or damage occurred during shipping.

  Do not discard the packing material until you have care-

fully inspected and satisfactorily operated the product.

  If  any  parts  are  damaged  or  missing,  please  call 

1-800-55-579 for assistance.

PACKINg LIST

WARNINg: 

If  any  parts  are  damaged  or  missing  do  not  operate 
this product. Please return to the place of purchase or 
call 1-800-55-579 for assistance.

WARNINg: 

Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any 
such alteration or modification is misuse and could result 
in  a  hazardous  condition  leading  to  possible  serious 
personal injury.

OPERATION

WARNINg:

Do  not  allow  familiarity  with  this  product  to  make  you 
careless. Remember that a careless fraction of a second is 
sufficient to inflict serious injury.

WARNINg:

Do not use any attachments or accessories not recom-
mended by the manufacturer of this product. The use of 
attachments or accessories not recommended can result 
in serious personal injury.

APPLICATIONS

You may use this product for the purposes listed below:

 

Aligning multiple pictures on a wall

 

Aligning wallpaper borders or chair rails

 

Lining up floor or wall tile

INSTALLINg BATTERIES

See Figures 3 - 4.

There are two battery compartments for the laser level, one 
for the AIRgrip vacuum and one for the laser.

To install batteries for the AIRgrip vacuum:

 

Locate the battery compartment on the base of the laser 
level and remove the battery cover plate. 

Fig. 3

 

Install two AA batteries according to polarity indicators 

(+ or −) inside the battery compartment.

 

Reinstall the battery cover plate.

To install batteries for the laser:

 

Rotate the line height adjustment knob to raise the laser 
lens housing to its highest position.

BATTERy COVER 

PLATE

AA BATTERIES

Crosshair Laser Level
AA Batteries (4)
Rough Surface Adaptor
Multi-Function Base
Push Pins ()

Hook-and-Loop Strap
Tripod Adaptor
Case
Operator’s Manual

Summary of Contents for AIRgrip ProCross ELL0006















Reviews: