OPERATiON
objects such as pipes, x4s, x6s, or metal
grates.
Attach the strap to one side of the laser
level base by threading it through the loop
and fastening.
Position the laser level on the surface
where you want it mounted.
Wrap the strap around the object being
mounted (pipe, board, etc.).
Place the loose end of the strap through
the remaining loop on the laser level base
and secure.
PUSH PiNS: Push pins allow the laser level
to be mounted to stucco and permeable sur-
faces.
Place the laser level on the surface where
you want it mounted.
Align push pin with angled hole located on
one side of laser level base and push in to
secure.
In the angled hole on the other side of laser
level base, secure the second push pin.
TRiPOd: The laser level base has a standard
/4 in.-0 threaded fitting for attaching to a
tripod base (not included). This method of
mounting is ideal for leveling kitchen cabinets,
countertops, window framing, and more.
Fig. 7
CAUTiON:
Use caution when using laser level in base.
Do not orient in a way that will allow the
laser level to slide or fall out of the base.
push piNs
tripOD
hOle
velcrO
®
strap
push
piN hOles
lOOp
