Ryobi CID120L, Operator'S Manual

6  — English

OPERATION

WARNING:

Do not drive a screw where there is likely to be hidden 
wiring behind the surface. Contact with a “live” wire will 
make exposed metal parts of the tool “live” and shock 
the operator. If you must drive a screw where hidden wire 
may be present, always hold tool by insulated gripping 
surfaces (handle) when performing the operation to 
prevent a shock to the operator.

NOTICE:

The impact driver is not designed to be used as a drill.

DRIVING OR REMOVING SCREWS

See Figures 4 and 5, page 8.



  Place the direction of rotation selector in the correct 

position for the operation.



  Hold the impact driver with one hand.



  Place the bit on the screw head and slowly depress the 

switch trigger. Start the bit slowly for more control.



  As the screw is driven, impacting will begin.

NOTE: Maintenance information begins on page 7 after French  

and Spanish language sections. Figures (Illustrations) start on page 8.

This product has a Three-year Limited Warranty. 

For Warranty details go to www.ryobitools.com

CALIFORNIA PROPOSITION 65

WARNING:

This product and some dust created by power sanding, sawing, grinding, drilling, and other construction activities may 
contain chemicals, including lead, known to the State of California to cause cancer, birth defects, or other reproductive 
harm. 

Wash hands after handling.

Some examples of these chemicals are:

•  lead from lead-based paints,
•  crystalline silica from bricks and cement and other masonry products and,
•  arsenic and chromium from chemically treated lumber. 

Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your 
exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially 
designed to filter out microscopic particles.