background image

OWNER’S OPERATING MANUAL

620 Watt JIG SAW

MODEL COJ6220VK

SPECIFICATIONS:

Power Input  . . . . . 620 watts

No Load Speed  . . . 500 - 3000 rpm

Cutting Capacity

Timber . . . . . . . . . .65mm

Steel  . . . . . . . . . . .5mm

Aluminium  . . . . . .12mm

Bevel  . . . . . . . . . . .0 - 45º

Weight  . . . . . . . . . .1.5kg

THANK YOU FOR BUYING A RYOBI JIG SAW

Your new Jig Saw has been engineered and manufactured to Ryobi's high standard for
reliability, ease of operation, and operator safety. Properly cared for, it will give you years of
rugged, trouble free performance.

CAUTION: Carefully read through this entire owner's manual before using your Jig Saw

Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. 

If you use your Jigsaw properly and only for what it is intended, you will enjoy years of safe, reliable
service.

Thank you again for buying Ryobi tools.

SAVE THIS MANUAL FOR FUTURE REFERENCE

IMPORTANT NOTICE:

This

JIG SAW

is designed for light consumer use. It is ideal for 

CUTTING

jobs around the home. It is 

NOT

designed for trade or industrial use and is not

covered by warranty for use in these applications.

DOUBLE
INSULATED

Summary of Contents for COJ6220VK






Reviews: