Ryobi CSD-480 User Manual Download

Page: 9 / 80

English

FIN

RUS

GENERAL SAFETY RULES

■

Use battery operated tool only with specifically
designated battery pack. Use of any other batteries
may create a risk of fire. Use only with battery pack
with battery pack listed.

■

Do not abuse the supply cord (if fitted).
Never carry the tool by the cord or yank it to disconnect
it from the socket. Keep the cord away from heat, oil
and sharp edges.

■

ACCESSORIES: Only use accessories that are
recommended by the manufacturer of your model.
Accessories that may be suitable for one tool may
create a risk of injury when used on another tool.

WARNING
The use of any accessories or attachments,
except those recommended in this instruction
manual and from other recognized accessory
suppliers, may present a risk of personal injury.

■

Ensure the battery pack is correct for the tool.
Ensure the outside surface of battery pack or tool is
clean and dry before plugging into charger.
Ensure that batteries are charged using the correct
charger recommended by the manufacturer, incorrect
use may result in risk of electric shock, overheating or
leakage of corrosive liquid from the battery.

■

Have your tools repaired by a qualified person.
This electric tool is manufactured in accordance with
the relevant safety requirement. Repairs should only
be carried by qualified persons using original spare
parts otherwise this may result in considerable
danger to the user.

■

If under abusive conditions, liquid is ejected from
the battery, avoid contact. If this accidentally
occurs, flush with water. If liquid contacts eyes
additionally, seek medical help.

SPECIFIC SAFETY RULES

■

To reduce the risk of electric shock, unplug
charger from outlet before attempting any
maintenance or cleaning. Turning off controls will
not reduce this risk. Following this rule will reduce the
risk of electric shock, fire, or serious personal injury.

■

Disconnect charger from power supply when not
in use. Following this rule will reduce the risk of
electric shock, fire, or serious personal injury.

DANGER
RISK OF ELECTRIC SHOCK. DO NOT TOUCH
UNINSULATED PORTION OF OUTPUT
CONNECTOR OR UNINSULATED BATTERY
TERMINAL.

■

Save these instructions. Refer to them frequently
and use them to instruct others who may use this tool.
If you loan someone this tool, loan them these
instructions also. Following this rule will reduce the
risk of electric shock, fire, or serious personal injury.

■

SERVICE: Now that you have purchased your tool,
should a need ever exist for repair parts or service,
simply contact your nearest Ryobi Authorized
Service Center.

SPECIFICATION

Motor

4.8 Volts DC

Collet

6.35 mm

No Load Speed

300 min-

Switch

Forward and Reverse

Maximum Torque

6.21 Nm

Charger Rating

230 V ~ 50 Hz 3.5 W

Charge Time

3 - 5 hours

UNPACKING INSTRUCTIONS

Your screwdriver has been shipped completely assembled.

■

Carefully remove the screwdriver, and accessories
from the box. Make sure that all items listed in the
packing list are included.

■

Inspect the screwdriver carefully to make sure no
breakage or damage has occurred during shipping.

■

Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tools.

PACKING LIST

Screwdriver

Bits

Charger

Operator's Manual

WARNING
If any parts are missing, do not operate this tool
until the missing parts are replaced. Failure to do
so could result in possible serious personal injury.