GENERAL SAFETY RULES
■
Keep cutting tools sharp and clean.
Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
■
Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed.
Use of the power
tool for operations different from intended could result
in a hazardous situation.
BATTERY TOOL USE AND CARE
■
Ensure the switch is in the off position before
inserting battery pack.
Inserting the battery pack
into power tools that have the switch on invites
accidents.
■
Recharge only with the charger specified by the
manufacturer.
A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
■
Use power tools only with specifically designated
battery packs.
Use of any other battery packs may
create a risk of injury and fire.
■
When battery pack is not in use, keep it away
from other metal abjects like paper clips, coins,
keys, nails, screws, or other small metal objects
that can make a connection from one terminal to
another.
Shorting the battery terminals together may
cause burns or a fire.
■
Under abusive conditions, liquid may be ejected
from the battery; avoid contact.
If contact
accidentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected
from the battery may cause irritation or burns.
SERVICE
■
Have your power tool serviced by a qualified
repair person using only identical replacement
parts.
This will ensure that the safety of the power
tool is maintained.
SPECIFIC SAFETY RULES
Always wear safety glasses with side
shields.
Everyday glasses have only impact
resistant lenses. They are NOT safety glasses.
Following this rule will reduce the risk of eye injury.
Protect your lungs.
Wear a face or dust mask
if the operation is dusty. Following this rule will
reduce the risk of serious personal injury.
Protect your hearing.
Wear hearing protection
during extended periods of operation.
Following this rule will reduce the risk of serious
personal injury.
SPECIFICATIONS
Motor 18
V
Switch Single
Shot
Trigger
Magazine Capacity
84 staples
Staple Speed
40 shots min
-1
Staples
Type 50
Staple Size
- Crown Width
10.8 mm
- Length
6.3 mm, 7.9 mm,
9.5 mm, 12.7 mm,
13.5 mm, 14 mm
Battery pack (Not Included)
BPP-1815M/BPP-1817M
Charger (Not Included)
BC-1815S/BC-1800
DESCRIPTION
1. Depth adjustment knob
2. Switch
trigger
3. Handle
4. Activation
foot
5. Low staple view window
6. Battery pack (Not Included)
7. Latches
8. Depress latches to release battery pack
9. Squeeze latches to open base
10. Staples
11. Decrease force
12. Increase force
OPERATION
WARNING
Always wear safety goggles or safety glasses
with side shields when operating tools. Failure to
do so could result in objects being thrown into
your eyes, resulting in possible serious injury.
WARNING
Do not use any attachments or accessories not
recommended by the manufacturer of this tool.
The use of attachments or accessories not
recommended can result in serious personal injury.
6
GB
English
F
D
E
I
P
NL
S
DK
N
FIN
GR
H
CZ
RUS
PL
RO
SLO
TR
HR
CST-180M _20 lgs.qxd 9/22/03 4:13 PM Page 6
