Ryobi EAG1518RG, Owner'S Operating Manual

6

POLISHING

See Figure 7.

The polishing feature is designed to bring shine to the 
painted surfaces of timber and metal. Work the tool in the 
lowest speed setting; if used with higher speed, the paint 
or 

fi

 nish can burn.

SANDING

See Figure 8.

Choose sanding paper carefully for each application for 
best operation and 

fi

 nish. To have the best sanding result, 

it is recommended to work with lower speed. Use the 
sanding feature for sanding off old paint from timber and 
metal surfaces. It can also be used for smoothing timber 
surface.

 WARNING

Recommend to use sanding pad with minimum no-load 
speed 7200/min. The maximum no-load speed of unit 
is 6500/min.

LIVE TOOL INDICATOR

This tool features a live tool indicator which illuminates as 
soon as the tool is connected to the supply. This warns the 
user that the tool is connected and will operate when the 
switch is pressed.

MAINTENANCE

After use, check the tool to make sure that it is in good 
condition.
It is recommended that you take the tool to a Ryobi 
authorised service center for thorough cleaning and 
lubrication at least once a year.

 WARNING

Do not make any adjustments while the motor is in 
motion.
Always disconnect the power cord from the socket 
before changing removable or expendable parts 
(grinding disc, cutting disc etc), before lubricating or 
working on the unit.
If the supply cord is damaged, it shall be replaced by 
the manufacturer or its service agent or similar quali

fi

 ed 

person in order to avoid a hazard.

 WARNING

To ensure safety and reliability, all repairs should be 
performed by an authorised service center or other 
quali

fi

 ed service organisation.