7
Getting started
1
2
1
2
1
2
2
1
1
2
2
1
1
4
7
2
5
8
9
3
6
4
7
Always wear safety goggles or safety
glasses with side shields when
operating the product. Wear non-skid,
protective footwear that will protect
your feet and improve your footing on
slippery surfaces.
Insert the spray wand into the trigger
handle. Slide the nut onto the threaded
coupling and hand tighten securely.
Install either the flat fan nozzle or cone
spray nozzle and tighten.
Loosen the tank lid and remove it from
the tank.
Fill the tank with the required amount
of liquid (up to 15L).
Place the tank lid back onto the tank
and tighten.
Raise the battery cover, and install
the battery pack. Make sure that the
latches on each side of the battery pack
click in place.
Wear the product on your back.
Insert the harness buckle to the
harness latch until it clicks. Pull both
ends of the harness to tighten.
