2
2
1
1
1
2
4
3
7
Rotate the quick release fastener on each side until it aligns with the lower handles, then lock
the fasteners in place.
3
2
2
1
1
3
3
4
Install the upper handle according to the
preferred height, aligning the upper handle
hole to the appropriate lower handle hole.
Install the bolts and knobs on each side to
secure the handle.
5
Route the motor control cable through the
motor control cable retainers.
WARNING:
Make sure that the motor cable
does not hang loose and does not touch the
wheels.
Open the battery door. Insert the battery into the product. Make sure that the latch on each
side of the battery pack snaps in place and that the battery pack is secured to the product
before operating. Insert the isolator key, and close the battery door.
Press and hold down the start button, then
pull and hold either side of the on/off trigger
to start the product. Release the start button,
and keep holding the on/off trigger to keep
using the product.
NOTE:
The on/off trigger must be
continuously held during use. To turn the
product off, release the on-off trigger.
A
1
2
A
+ /
B
B
B
A
8
11
GETTING STARTED
GETTING STARTED
