Ryobi ONE+ 6, Original Instructions Manual

3

Safety, performance, and dependability have been given 

top priority in the design of your charger.

INTENDED USE

This charger is only intended to charge RYOBI ONE+ 

Lithium-Ion battery packs listed in this manual.
The product is only for use indoors in dry conditions.
The product is not intended to charge any other type of 

battery or be used as a power supply or any other purpose. 

It  should  never  be  used  in  explosive  or  inflammable 

environments.

CHARGER SAFETY WARNINGS

Please read and observe these instructions before using the 

product. Failure to follow these instructions and warnings 

increases the risk of electric shock, fire and explosion.

 WARNING

Do not recharge primary cells (non-rechargeable).

 WARNING

Mains voltage must correspond with the voltage 

specifications on the product.

■

Before using the product, check that the product 

enclosure, cable and adaptor plug are not damaged. 

If damage is found, do not use and follow instruction in 

the maintenance section of this manual.

■

The product must not be damp, and should never be 

used in a damp environment. 

■

The product is for indoor use only.

■

Do not use the product if it has suffered any heavy 

shock or jolting, or is damaged in any other way.

■

Do not conduct charging in a position which may 

become exposed to sunlight or other heat source. 

Recommended temperature range at charging vicinity 

is 10° to 25° C.

■

Due to the heat generated during charging, the product 

should not be operated on a combustible surface. 

■

Do not conduct charging operations in the vicinity 

of flammable materials. Example: Cloth, packaging 

materials, paint, spray paint or aerosols, lubricant, 

thinners, petrol containers, gas containers or gas 

appliances.

■

Do not cover any ventilating slots and provide adequate 

ventilation during operation.

■

Never modify, disassemble or attempt to repair the 

product yourself.

■

Do not allow the charger or batteries to become 

contaminated with any material which could be 

conductive. Example: Metal particles from grinding, 

cutting or machining processes.

■

Remove the plug of the product from the power socket 

when it is not in use or when cleaning it.

■

Only use extension cable that is approved and in good 

condition. 

■

Protect battery contacts to avoid a short circuit caused 

by metallic objects which could cause a fire or explosion!

■

Do not charge batteries which show signs they have 

leaked electrolyte. Dispose of them properly.

■

Never charge a damaged battery pack. If damaged, 

replace immediately.

■

If the battery is not going to be used for a while, remove 

the charger plug from the power socket and take the 

battery off the product.

ADDITIONAL BATTERY SAFETY WARNINGS

 WARNING

To reduce the risk of fire, personal injury, and product 

damage due to a short circuit, never immerse your 

tool, battery pack or charger in fluid or allow a fluid to 

flow  inside  them.  Corrosive  or  conductive  fluids,  such 

as seawater, certain industrial chemicals, and bleach 

or bleach-containing products, etc., can cause a short 

circuit.

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local and national 

provisions and regulations.
Follow all special requirements on packaging and labelling 

when transporting batteries by a third party. Ensure that 

no batteries can come in contact with other batteries 

or conductive materials while in transport by protecting 

exposed connectors with insulating, non-conductive caps 

or tape. Do not transport batteries that are cracked or 

leaking. Check with the forwarding company for further 

advice.

KNOW YOUR PRODUCT

See page 6.

1.  LED indicators
2.  Battery port
3.  USB charging port
4.  Battery port number
5.  Key hole hanger

OPERATION

CHARGING THE BATTERY PACK

Battery packs are shipped in a low charge condition to 

prevent possible problems. Therefore, you should charge 

them before first use. If the charger does not charge your 

battery pack under normal circumstances, return both 

the battery pack and charger to your nearest authorised 

service center for electrical check.
Do not charge nickel cadmium (NiCd) battery packs. When 

a NiCd battery pack is inserted, the corresponding LED 

indicator will fade in red.

NOTE:

 When multiple battery packs are connected to the 

charger, the battery packs are charged one at a time in the