background image

9

ASSEMBLY

TRIGGER

UNPACKING

This product requires assembly.

  Carefully remove the product and any accessories from 

the box. Make sure that all items listed in the packing list 
are included.

  Inspect the product carefully to make sure no breakage 

or damage occurred during shipping.

  Do not discard the packing material until you have carefully 

inspected and satisfactorily operated the product.

  If  any  parts  are  damaged  or  missing,  please  call 

1-800-860-4050 for assistance.

PACKING LIST

Home and Garden Sprayer
Hose
Spray Wand
Operator’s Manual

WARNING: 

If  any  parts  are  damaged  or  missing  do  not  operate 
this product until the parts are replaced. Failure to heed 
this warning could result in serious personal injury.

WARNING: 

Do  not  attempt  to  modify  this  product  or  create 
accessories not recommended for use with this product. 
Any such alteration or modification is misuse and could 
result in a hazardous condition leading to possible serious 
personal injury.

WARNING:

To prevent accidental starting that could cause serious 
personal injury, always remove the battery pack from the 
product when assembling parts.

ATTACHING THE HOSE

See Figure 2.

To attach the hose: 

  Insert the hose end into the hose port as shown. Make 

sure the connection is secure.

  Slide  the  cap over the  hose port and hose end. Hand 

tighten as shown. Do not overtighten.

ATTACHING THE SPRAY WAND

See Figure 3.

To attach the spray wand: 

  Slide the cap over the spray wand.

Fig. 2

SPRAY 

WAND

CAP

HANDLE

SLIDE CAP 

OVER WAND

INSERT WAND

INTO HANDLE

TO TIGHTEN 

CAP

  Insert the spray wand into the handle until it stops. Do 

not force.

  Slide the cap down over the spray wand and hand tighten 

as shown.

Fig. 3

HOSE 

PORT

HOSE 

END

CAP

Summary of Contents for P2400

















Reviews: