11 — English
This product has a Three-year Limited Warranty for personal,
family, or household use (90 days for business or commercial use).
For warranty details, visit www.ryobitools.com
or call (toll free) 1-800-525-2579.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
Spray pattern is inconsistent.
Unit is not level and is allow-
ing fluid to enter through the
tank filter.
Unit is being shaken or moved
too fast.
Unit must be kept level during use.
Allow the unit to remain still until the liquid inside settles
and normal spraying/fogging resumes, then move slowly
and do not shake the unit during use.
Unit will not spray or sprays
improperly.
Fluid level is too low in the
tank.
Replenish the tank to a higher volume.
Unit is “spitting” after trigger is
released.
Liquid in tank is too thick.
Empty the tank, clean both the tank and filter, then try
again. Make sure that all chemicals/liquid used in the
sprayer are as thin as water.
Spray is weak.
Filter or nozzle needs to be
cleaned.
Solution is too thick.
Clean filter as described in
Cleaning the Filter
.
Make sure that all chemicals/liquid used in the sprayer
are as thin as water.
Unit runs for a short period
then shuts off.
Battery needs charging.
Solution is too thick.
Recharge the battery.
Make sure that all chemicals/liquid used in the sprayer
are as thin as water.
