Ryobi R18FRF10, Manual

5

Original Instructions

Function

Description

Power button

Turns the product on or 

off.

Cooling mode

Toggles between fast 

cooling or energy saving.

Temperature 

control

Adjusts the cooling or 

heating temperature.

Temperature unit 

setting

Adjusts the temperature 

unit to Celsius or 

Fahrenheit.

Battery 

protection mode

Protects the installed 

battery pack from 

overvoltage. Set H (high) 

protection mode when 

connecting the product 

to car power. Set M 

(medium) or L (low) 

protection mode when 

connecting to a portable 

or back-up power source.

Reset mode

Resets the product. 

Activate the reset mode 

to revert the product to its 

factory settings.

ADDITIONAL BATTERY SAFETY 

WARNINGS

To  reduce  the  risk  of  fire,  personal  injury, 

and product damage due to a short circuit, 

never immerse the product, battery pack, or 

charger  in  fluid  or  allow  fluid  to  flow  inside 

them. Corrosive or conductive fluids, such as 

seawater, certain industrial chemicals, and 

bleach or bleach-containing products, etc., can 

cause a short circuit.

TRANSPORTATION AND STORAGE

■

Drain all water, remove food and drinks 

from the product, and wipe the interior with 

a clean, dry cloth. Remove the battery pack 

and make sure that all compartments are 

securely closed. Store the product with the 

handle folded down.

■

Do not store or transport the product with 

the battery pack fitted. Remove the battery 

pack, and secure it separately. Store the 

product in a cool, dry, and well-ventilated 

place that is inaccessible to children. Keep 

the product away from corrosive agents, 

such as garden chemicals and de-icing 

salts. Do not store the product outdoors.

■

When transporting the product in a vehicle, 

secure it against movement or falling to 

prevent injury to persons or damage to the 

product.

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local 

and national provisions and regulations.
Follow all special requirements on packaging 

and labelling when transporting batteries 

by a third party. Ensure that no batteries 

can come in contact with other batteries or 

conductive materials while in transport by 

protecting exposed connectors with insulating, 

nonconductive caps or tape. Do not transport 

batteries that are cracked or leaking. Check 

with the forwarding company for further advice.

MAINTENANCE

■

Use only original manufacturer’s 

replacement parts, accessories, and 

attachments. Failure to do so can cause 

possible injury, can contribute to poor 

performance, and may void your warranty.

■

Servicing requires extreme care and 

knowledge and should be performed only 

by a qualified service technician. Have the 

product serviced by an authorised service 

centre only.

■

You may make adjustments and repairs 

described in this manual. For other repairs, 

contact an authorised service centre.

■

Avoid using solvents when cleaning plastic 

parts. Most plastics are susceptible to 

damage from various types of commercial 

solvents and may be damaged by their use. 

Use clean cloths to remove dirt, dust, oil, or 

grease. Do not at any time let brake fluids, 

gasoline, petroleum-based products, or 

penetrating oils come in contact with plastic 

parts. Chemicals can damage, weaken, or 

destroy plastic, resulting in serious personal 

injury.

■

Bring the product to an authorised service 

centre to replace damaged or unreadable 

labels.

■

If the supply cord is damaged, it must be 

replaced by a special cord or assembly 

available from the manufacturer or its 

service agent.

■

The product does not contain gasses, in 

either its refrigerant circuit or insulation 

materials, which could damage the ozone 

layer. Do not discard the product together 

with urban waste.