Ryobi RA-NP2325-S, Operator'S Manual

9

LUBRICATION

$Q

DXWRPDWLF

LQOLQH

¿OWHUUHJXODWRUOXEULFDWRU

LV

recommended (Fig. 10) as it increases product life and keeps 
the product in sustained operation. The in-line lubricator 

VKRXOGEHUHJXODUO\FKHFNHGDQG¿OOHGZLWKDLUWRRORLO

Proper adjustment of the in-line lubricator is performed by 
placing a sheet of paper next to the exhaust ports and 
actuate the tool 10 - 15 times without fasteners loaded. 
The lubricator is properly set when a light stain of oil 
collects on the paper. Excessive amounts of oil should be 
avoided.
If it becomes necessary to store the product for an extended 
period of time (overnight, weekend, etc.), it should receive 
a generous amount of lubrication at that time. Actuate the 
tool 10 - 15 times without fasteners loaded to ensure oil 
has been evenly distributed throughout the product. The 
product should be stored in a clean and dry environment. 

Ɣ

It is most important that the product be properly 
lubricated by keeping the air line lubricator filled 
and correctly adjusted. Without proper lubrication 
the product will not work properly and parts will 
wear prematurely.

Ɣ

Use correct lubricant in the air line lubricator. The 
lubricator should be of low air flow or changing air 
flow type, and should be kept filled to the correct 
level. Use only recommended lubricants, specially 
made for pneumatic applications. Substitutes 
may harm the rubber compounds in the product's 
O-rings and other rubber parts.

IMPORTANT!

6HH¿JXUH

,I D ¿OWHUUHJXODWRUOXEULFDWRU LV QRW LQVWDOOHG RQ WKH DLU

system, air operated tools should be lubricated at least 
once a day or after 2 hours of work with 2 - 6 drops 
of oil, depending on the work environment, directly 

WKURXJKWKHPDOH¿WWLQJLQWKHWRROKRXVLQJ

20141223v1