Ryobi RBC30SBSB, User Manual

17

English (Original instructions)

DESCRIPTION

1. Primer 

Bulb

2. Choke 

lever

3. Fuel 

Cap

4. Starter 

Grip

5. Throttle 

Lock

6.  On / Off Switch
7. Throttle 

Trigger

8.  Rear Handle (RBC30SESB)
9.  Front Handle (RBC30SESB)
10.  Shoulder Strap (RBC30SESB) / Harness 
(RBC30SBSB)
11. Shaft
12. Blade Guard
13. Tri-arc Blade
14. Grass Deflector
15. Cutting Line
16.  Idle Speed Screw
17. Knob 
18. Hanger Cap 
19.  Trigger Handle (RBC30SBSB only)
20.  Left Handle (RBC30SBSB only)
21.  Throttle interlock (RBC30SBSB only)
22. ReelEasy

TM

23.  Latch
24.  Bolt (RBC30SBSB only)
25.  Clamp (RBC30SBSB only)
26.  Combination wrench (RBC30SBSB only)
27.  Bracket (RBC30SBSB only)
28.  Bike handle (RBC30SBSB only)
29.  Wrench
30.  Clamp
31.  Screw
32.  Bracket (RBC30SESB only)
33.  Securing bolt (RBC30SESB only)
34.  Pin (RBC30SESB only)

ASSEMBLY

Please refer to Fig. 2a - 2d.
Unpacking
This product requires assembly.

■

Carefully remove the tool and any accessories from 
the box. Make sure that all items listed in the packing 
list are included.

■

Inspect the tool carefully to make sure no breakage or 
damage occurred during shipping.

■

Do not discard the packing material until you have 
carefully inspected and satisfactorily operated the tool.

 WARNING

 If any parts are damaged or missing, do not 

operate this tool until the parts are replaced. 

Failure to heed this warning could result in 
serious personal injury.

 WARNING

 Do not attempt to modify this product or create 

accessories not recommended for use with this 
product. Any such alteration or modification is 
misuse and could result in a hazardous condition 
leading to possible serious personal injury.

 WARNING

 To prevent accidental starting that could cause 

serious personal injury, always disconnect the 
engine spark plug wire from the spark plug when 
assembling parts.

WARNING

 Never attach or adjust any attachment while 

power head is running. Failure to stop the engine 
may cause serious personal injury.

WARNING

 Be certain the knob is fully tightened before 

operating equipment; check it periodically for 
tightness during use to avoid serious injury.

OPERATION

FUEL AND REFUELING

HANDLING THE FUEL SAFELY

 WARNING

 Check for fuel leaks. If any are found, correct 

them before using the product to prevent fire or 
burn injury.

■

Always handle fuel with care, it is highly flammable.

■

Always refuel outdoors where there are no sparks 
and flames. Do not inhale fuel vapors.

■

Do not let petrol or lubricant come in contact with 
your skin.

■

Keep petrol and lubricant away from the eyes. If 
petrol or lubricant comes in contact with the eyes, 
wash them immediately with clean water. If irritation is 
still present, see a doctor immediately.

■

Clean up spilled petrol immediately.

■

Always transport and store fuel in a container 
approved for petroleum.

MIXING THE FUEL

 (Fig. 3)

■

This product is powered by a 2-stroke engine and 
requires pre-mixing petrol and 2-stroke lubricant. Pre-
mix unleaded petrol and 2-stroke engine lubricant in a 
clean container approved for petrol.

■

This engine is certified to operate on unleaded petrol 
intended for automotive use with an octane rating