Ryobi RBC30SBSB, User Manual

14

English (Original instructions)

Thank you for buying a Ryobi trimmer/brushcutter.

Your new trimmer/brushcutter has been engineered and 
manufactured to Ryobi’s high standard for dependability, 
ease of operation, and operator safety. Properly cared for, 
it will give you years of rugged, trouble-free performance.

INTENDED USE

This product is only intended for use outdoors in a well 
ventilated area.
The product is intended for cutting long grass, pulpy 
weed, or brush and similar vegetation at or about ground 
level. The cutting plane should be approximately parallel 
to the ground surface. The product should not be used 
to trim hedges, bushes or other vegetation where the 
cutting plane is not parallel to the ground surface.

WARNING

 To reduce the risk of injury, the user must read 

and understand the operator’s manual.

WARNING

 Do not attempt to operate this trimmer/brushcutter 

until you have read thoroughly and understood 
completely all instructions, safety rules etc 
contained in this manual. Failure to comply may 
result in accidents involving fire, electric shock 
or serious personal injury. Save operator’s 
manual and review frequently for continuing safe 
operation, and instructing others who may use 
this tool.

READ ALL INSTRUCTIONS.

GENERAL SAFETY RULES

■

For safe operation, read and understand all 
instructions before using the trimmer/brushcutter. 
Follow all safety instructions. Failure to follow all 
safety instructions listed below, can result in serious 
personal injury.

■

Do not allow children or untrained individuals to use 
this unit.

■

Never start or run the engine in a closed or poorly 
ventilated area; breathing exhaust fumes can kill.

■

Clear the work area before each use. Remove all 
objects such as rocks, broken glass, nails, wire, 
or string which can be thrown or become entangled in 
the string head or blade.

■

Wear full eye and hearing protection while operating 
this unit.

■

Wear heavy long pants, boots, and gloves. Do not 
wear loose fitting clothing, short pants, jewellery of 
any kind, or use with bare feet.

■

Secure long hair so it is above shoulder level to 
prevent entanglement in any moving parts.

■

Keep all bystanders, children, and pets at least 15 m  
away.

■

Do not operate this unit when you are tired, ill, or 
under the influence of alcohol, drugs, or medication.

■

Do not operate in poor lighting.

■

Keep firm footing and balance. Do not overreach. 
Overreaching can result in loss of balance or 
exposure to hot surfaces.

■

Keep all parts of your body away from any moving part.

■

Do not touch area around the muffler or cylinder of 
the trimmer/brushcutter, these parts get hot from 
operation.

■

Always stop the engine and remove the spark plug 
wire before making any adjustments or repairs except 
for carburetor adjustments.

■

Inspect the unit before each use for loose fasteners, 
fuel leaks, etc. Replace any damaged parts before use.

■

The string head or blade will rotate during carburetor 
adjustments.

■

It has been reported that vibrations from hand-held 
tools may contribute to a condition called Raynaud’s 
Syndrome in certain individuals. Symptoms may 
include tingling, numbness and blanching of the 
fingers, usually apparent upon exposure to cold. 
Hereditary factors, exposure to cold and dampness, 
diet, smoking and work practices are all thought to 
contribute to the development of these symptoms. 
It is presently unknown what, if any, vibrations or 
extent of exposure may contribute to the condition. 
There are measures that can be taken by the operator 
to possibly reduce the effects of vibration:

a)  Keep your body warm in cold weather. When 

opera-ting the unit wear gloves to keep the hands 
and wrists warm. It is reported that cold weather is 
a major factor contributing to Raynaud’s Syndrome.

b)  After each period of operation, exercise to increase 

blood circulation.

c)  Take frequent work breaks. Limit the amount of 

exposure per day.

If you experience any of the symptoms of this condition, 
immediately discontinue use and see your physician 
about these symptoms.

■

Keep the tool well maintained, fasteners tightened 
and worn parts replaced.

■

Mix and store fuel in a container approved for fuel.

■

Mix fuel outdoors where there are no sparks or flames. 
Wipe up any fuel spillage. Move 9 m away from 
refueling site before starting engine.