23
English
GB
F
D
E
I
P
NL
S
DK
N
FIN GR
HU
CZ
RU
RO
PL SLO HR
TR EST
LT
LV
SK
BG
ELECTRIC START
The Brushcutter has an electric start which can be used
in place of the pull start.
PRO CUT II
TM
LINE HEAD
The brushcutter is provided with an additional string
head.
GRASS DEFLECTOR
The brushcutter includes a grass deflector that helps
protect you from flying debris.
SHOULDER STRAP
The brushcutter includes a shoulder strap that helps
support the product.
TOP-MOUNTED MOTOR
The top-mounted motor improves balance and is located
away from the dust and debris of the cutting area.
OPERATION
WARNING:
Do not allow familiarity with this product to make
you careless. Remember that a careless fraction
of a second is sufficient to inflict serious injury.
WARNING:
Always wear safety goggles or safety glasses
with side shields when operating power tools.
Failure to do so could result in objects being
thrown into your eyes resulting in possible
serious injury.
WARNING :
keep all bystanders,especially children and pet,
at least 15m away.
WARNING:
Do not use any attachments or accessories
not recommended by the manufacturer of this
product. The use of attachments or accessories
not recommended can result in serious personal
injury.
FUELING AND REFUELING THE TRIMMER
WARNING:
Check for fuel leaks. If any are found, correct
them before using the unit to prevent fire or burn
injury.
Always handle fuel with care; it is highly flammable.
Always refuel outdoors, do not inhale fuel vapours.
Do not let petrol or lubricant come in contact with skin.
If contact does occur wash immediately with soap and
plenty of water.
Keep petrol and lubricant away from the eyes. If petrol
or lubricant comes in contact with the eyes, wash them
immediately with clean water. If irritation is still present,
see a doctor immediately.
Clean up spilled fuel immediately. Refer to Refuelling
in the Specific Safety Rules section of this manual for
additional safety information.
MIXING THE FUEL
This product is powered by a 2-stroke engine and
requires pre-mixing petrol and 2-stroke lubricant. Pre-mix
unleaded petrol and 2-stroke engine lubricant in a clean
container approved for petrol.
This engine is certified to operate on unleaded petrol
intended for automotive use with an octane rating of 91
or higher.
Do not use any type of pre-mixed petrol/lubricant from
fuel service stations; this includes the pre-mixed petrol/
lubricant intended for use in mopeds, motorcycles, etc.
Use a high quality 2-stroke self-mixing lubricant for air-
cooled engines. Do not use automotive lubricant or 2-
stroke outboard lubricant.
Mix 2% lubricant into the petrol. This is a 50:1 ratio.
Mix the fuel thoroughly and each time before fuelling.
Mix in small quantities. Do not mix quantities larger than
usable in a 30-day period. A 2-stroke lubricant containing
a fuel stabilizer is recommended.
FUEL MIXTURE
This product is powered by a 2-cycle engine and requires
pre-mixing petrol and 2-cycle lubricant. Pre-mix unleaded
petrol and 2-cycle engine lubricant in a clean 1 gallon
container approved for petrol.
Recommended fuel: This engine is certified to operate on
unleaded petrol intended for automotive use.
Mix a high quality 2-cycle engine lubricant at 100ml per
5L of petrol.
Do not use automotive lubricant or 2-cycle outboard -
lubricant.
DO NOT mix quantities larger than usable in a 30 day
period.
HIGH QUALITY 2-CYCLE ENGINE LUBRICANT
1 litre
+
20 ml =
}
50:
1
2 litres
+
40 ml =
50: 1
3 litres
+
60 ml =
50: 1
4 litres
+
80 ml =
50: 1
5 litres
+
100 ml =
50: 1
