Ryobi RCS1835B Original Instructions Manual Download

Page: 3 / 256

English

Safety, performance, and dependability have been given
top priority in the design of your electric chainsaw.

INTENDED USE

The electric chainsaw is intended for outdoor use only. For
safety reasons, the product must be adequately controlled
by using a two-handed operation at all times.
The product is designed for cutting branches, trunks, logs,
and beams of a diameter determined by the cutting length
of the guide bar. It is designed to cut wood only.
The product is to be used in domestic applications only by
adults who have received adequate training on the hazards
and preventative measures to be taken while using the
product. It should not be used for professional tree services.
Do not use the product for any other purpose.

GENERAL PRODUCT SAFETY WARNINGS

WARNING! Read all safety warnings, instructions,

illustrations and specifications provided with this
power tool.

Failure to follow all instructions listed below

may result in electric shock,

re, and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-
operated (corded) product or battery-operated (cordless)
product.

WORK AREA SAFETY

■

Keep work area clean and well lit.

Cluttered or dark

areas invite accidents.

■

Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust.

Power tools create sparks

which may ignite the dust or fumes.

■

Keep children and bystanders away while operating
a power tool.

Distractions can cause you to lose control.

ELECTRICAL SAFETY

■

Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk
of electric shock.

■

Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.

There is an increased risk of electric

shock if your body is earthed or grounded.

■

Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of
electric shock.

■

Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts.

Damaged or entangled cords increase

the risk of electric shock.

■

When operating a power tool outdoors, use an
extension cord suitable for outdoor use.

Use of a

cord suitable for outdoor use reduces the risk of electric
shock.

■

If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply.

Use of an RCD reduces the risk of

electric shock.

PERSONAL SAFETY

■

Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under the
influence of drugs, alcohol or medication.

A moment

of inattention while operating power tools may result in
serious personal injury.

■

Use personal protective equipment. Always wear
eye protection.

Protective equipment such as a dust

mask, non-skid safety shoes, hard hat or hearing
protection used for appropriate conditions will reduce
personal injuries.

■

Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool.

Carrying power tools with your finger on the

switch or energising power tools that have the switch
on invites accidents.

■

Remove any adjusting key or wrench before turning
the power tool on.

A wrench or a key left attached to

a rotating part of the power tool may result in personal
injury.

■

Do not overreach. Keep proper footing and balance
at all times.

This enables better control of the power

tool in unexpected situations.

■

Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away from
moving parts.

Loose clothes, jewellery or long hair can

be caught in moving parts.

■

If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used.

Use of dust collection

can reduce dust-related hazards.

■

Do not let familiarity gained from frequent use of
tools allow you to become complacent and ignore
tool safety principles.

A careless action can cause

severe injury within a fraction of a second.

POWER TOOL USE AND CARE

■

Do not force the power tool. Use the correct power
tool for your application.

The correct power tool will

do the job better and safer at the rate for which it was
designed.

■

Do not use the power tool if the switch does not turn
it on and off.

Any power tool that cannot be controlled

with switch is dangerous and must be repaired.

■

Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools.

Such

preventive safety measures reduce the risk of starting
the power tool accidentally.

■

Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained
users.

■

Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the
power tool’s operation. If damaged, have the power
tool repaired before use.

Many accidents are caused

by poorly maintained power tools.