Ryobi RCS2340, Original Instructions Manual

3

may make exposed metal parts of the power tool “live” 
and could give the operator an electric shock.

Ŷ

Wear safety glasses and hearing protection. Further 
protective equipment for head, hands, legs and feet 
is recommended.

 Adequate protective clothing will 

reduce personal injury by flying debris or accidental 
contact with the saw chain.

Ŷ

Do not operate a chainsaw in a tree.

 Operation of 

a chainsaw while up in a tree may result in personal 
injury.

Ŷ

Always keep proper footing and operate the 
chainsaw only when standing on fixed, secure and 
level surface.

 Slippery or unstable surfaces such as 

ladders may cause a loss of balance or control of the 
chainsaw.

Ŷ

When cutting a limb that is under tension be alert 
for spring back.

 When the tension in the wood fibres is 

released the spring loaded limb may strike the operator 
and/or throw the chainsaw out of control.

Ŷ

Use extreme caution when cutting brush and 
saplings.

 The slender material may catch the saw 

chain and be whipped toward you or pull you off 
balance.

Ŷ

Carry the chainsaw by the front handle with the 
chainsaw switched off and away from your body. 
When transporting or storing the chainsaw always 
fit the guide bar cover.

 3URSHU KDQGOLQJ RI WKH

chainsaw will reduce the likelihood of accidental contact 
with the moving saw chain.

Ŷ

Follow instructions for lubricating, chain tensioning 
and changing accessories.

 Improperly tensioned 

or lubricated chain may either break or increase the 
chance for kickback.

Ŷ

Keep handles dry, clean, and free from oil and 
grease.

 Greasy, oily handles are slippery causing loss 

of control.

Ŷ

Cut wood only. Do not use chainsaw for purposes 
not intended. For example: do not use chainsaw 
for cutting plastic, masonry or non-wood building 
materials.

 Use of the chainsaw for operations different 

than intended could result in a hazardous situation.

Causes and operator prevention of kickback:

Kickback may occur when the nose or tip of the guide bar 
touches an object, or when the wood closes in and pinches 
the saw chain in the cut.

Tip contact in some cases may cause a sudden reverse 
reaction, kicking the guide bar up and back towards the 
operator.

3LQFKLQJWKHVDZFKDLQDORQJWKHWRSRIWKHJXLGHEDUPD\

push the guide bar rapidly back towards the operator.

Either of these reactions may cause you to lose control of 
the saw which could result in serious personal injury. Do 
not rely exclusively upon the safety devices built into your 
saw. As a chainsaw user, you should take several steps to 
keep your cutting jobs free from accident or injury.

Kickback is the result of tool misuse and/or incorrect 
operating procedures or conditions and can be avoided by 
taking proper precautions as given below:

Ŷ

Maintain a firm grip, with thumbs and fingers 

encircling the chainsaw handles, with both hands 
on the saw and position your body and arm to allow 
you to resist kickback forces.

 Kickback forces can 

be controlled by the operator, if proper precautions are 
taken. Do not let go of the chainsaw.

Ŷ

Do not overreach and do not cut above shoulder 
height. 

This helps prevent unintended tip contact and 

enables better control of the chainsaw in unexpected 
situations.

Ŷ

Only use replacement bars and chains specified 
by the manufacturer.

 Incorrect replacement bars and 

chains may cause chain breakage and/or kickback.

ADDITIONAL CHAINSAW SAFETY WARNINGS

Ŷ

,WLVUHFRPPHQGHGWRFXWORJVRQDVDZKRUVHRUFUDGOH

when operating the product the first time.

Ŷ

Ensure all guards, handles and spiked bumper are 
properly fitted and are in good condition.

Ŷ

3HUVRQVXVLQJWKLVFKDLQVDZVKRXOGEHLQJRRGKHDOWK

The chainsaw is a heavy unit so the operator requires 
to be physically fit. The operator should be alert, have 
good vision, mobility, balance and manual dexterity. If 
there is any doubt, do not operate the chainsaw.

Ŷ

Do not start using the product until you have a clear 
work area, secure footing, and a planned retreat path 
away from the falling tree.

Ŷ

Beware of the emission of lubricant mist and saw dust. 
Wear a mask or respirator if required.

Ŷ

Electric power should be supplied via a residual current 

GHYLFH5&'ZLWKDWULSSLQJFXUUHQWRIQRWPRUHWKDQ

30 mA.

Ŷ

If the power cable becomes damaged, you must return 
the machine to an authorised service centre for repair 
or replacement.

Ŷ

Always keep the power cable tidy and away from the 
area of cutting. Apart from the danger of electrocution, 
untidy cables cause falls and trips.

Ŷ

'R QRW FXW YLQHV DQGRU VPDOO XQGHUJURZWK OHVV WKDQ
PPLQGLDPHWHU

Ŷ

Always hold the chainsaw with both hands when 
operating the saw. Use a firm grip with thumbs and 
fingers encircling the chainsaw handles. Right hand 
must be on the rear handle and left hand on the front 
handle.

Ŷ

Before starting the tool, make sure the saw chain is not 
contacting any object.

Ŷ

Do not modify your tool in any way or use it to power 
any attachments or devices not recommended by the 
manufacturer for your saw.

Ŷ

7KHUH VKRXOG EH D ILUVWDLG NLW FRQWDLQLQJ ODUJH

wound dressings and a means to summon attention 

HJ ZKLVWOH FORVH WR WKH RSHUDWRU $ ODUJHU PRUH

comprehensive kit should be reasonably nearby.

Ŷ

The operator may be tempted to remove the helmet if 
there is no danger of falling objects in the work area, but 
remember the helmet, particularly with the mesh visor, 
can help reduce the potential for injury to the face and 
head if kickback occurs.

Ŷ

An incorrectly tensioned chain can jump off the guide