17
MAINTENANCE CHART
Item
Remark
Pre-operation
Initial 1 month
Every 3 month
Every 6 month
Every 12 month
check (daily)
or 20hours
or 50 hours
or 100 hours
or 300 hours
Spark plug
Check condition
Adjust gap and clean
Replace if required
Engine oil
Check oil level
Replace
Air filter
Clean. replace if required
Fuel Filter
Clean fuel cock filter
Replace if required
Valve
Check and adjust when
clearance
engine is cold
Fuel line
Check fuel hose for cracks
or damage. Replace if required
Exhaust
Check for leakage. Tighten or
system
replace gasket if required.
Check exhaust screen. Clean
and replace if required.
Carburetor
Check choke operation
Cooling
Check fan damage
system
Starting
Check recoil starter
system
operation
Decarbon-
More frequently
isation
if necessary
Fittings/
Check all fittings and fixtures
Fastenings
and tighten if required
The figures quoted are emission levels and are not
necessarily safe working levels. Whilst there is a
correlation between the emission and exposure
levels, this cannot be used reliably to determine
whether or not the actual level of exposure of the
workroom, the other sources of noise etc. i.e. the
number of machines and the adjacent processes
and the length of time for which an operator is
exposed to the noise. Also the permissible
exposure level can vary from country. This
information however, will enable the user of the
machine to make a better evaluation of the hazard
and risk. The supplier recommends the use of ear
protection at all time.
