Ryobi RLM16E36H, Original Instructions Manual

■

injury caused by thrown objects

TRANSPORTATION AND STORAGE

■

Stop the product and disconnect from the 

power supply. Make sure that all moving 

parts have come to a complete stop. Allow 

the product it to cool before storing or 

transporting.

■

Clean all foreign material from the product. 

Store it in a cool, dry, and well-ventilated 

place that is inaccessible to children. Keep 

away from corrosive agents such as garden 

chemicals and de-icing salts. Do not store 

outdoors.

■

For transportation, secure the product 

against movement or falling to prevent 

injury to persons or damage to the product.

 WARNING

Use extreme caution when lifting or tilting the 

product for maintenance, cleaning, storage 

or transportation, the blade is sharp, keep 

all body parts away from the blade while it 

is exposed.

MAINTENANCE

 WARNING

Use only original manufacturer’s 

replacement parts, accessories and 

attachments. Failure to do so can cause 

injury, poor performance and may void your 

warranty.

 WARNING

Servicing requires extreme care and 

knowledge and should be performed 

only  by  a  qualified  service  technician.  For 

service, we suggest you bring the product 

to your nearest authorised service centre 

for repair. When servicing, use only original 

replacement parts.

■

Stop the product and disconnect from the 

power supply, make sure that all moving 

parts have come to a complete stop before 

any cleaning or maintenance task.

■

You may make adjustments and repairs 

described here. For other repairs, contact 

the authorised service agent.

■

Check the grass box frequently for wear or 

deterioration.

■

After each use, clean the product with a 

soft dry cloth. Any part that is damaged 

should be properly repaired or replaced by 

an authorised service centre.

■

Check all nuts, bolts and screws at frequent 

intervals for proper tightness to ensure the 

product is in safe working condition.

■

Be careful during adjustment of the product 

to prevent entrapment of the fingers 

between moving blades and fixed parts of 

the product.

■

When servicing the blades, be aware that 

even though the power source is switched 

off, the blades can still be moved.

■

The blade on the product is sharp. Use 

extreme caution and wear heavy duty 

gloves when fitting, replacing, cleaning or 

checking bolt security.

■

Replace damaged blades and bolts in sets 

to preserve balance.

RISK REDUCTION

It has been reported that vibrations from 

handheld tools may contribute to a condition 

called Raynaud’s Syndrome. Symptoms may 

include tingling, numbness and blanching of 

the fingers, usually apparent upon exposure to 

cold. Hereditary factors, exposure to cold and 

dampness, diet, smoking and work practices 

are all thought to contribute to the development 

of the these symptoms. There are measures 

that can be taken by the operator to possibly 

reduce the effects of vibration:

■

Keep your body warm in cold weather. 

When operating the product, wear gloves 

to keep the hands and wrists warm.

■

After each period of operation, exercise to 

increase blood circulation.

■

Take frequent work breaks. Limit the 

amount of exposure per day. 

If you experience any of the symptoms of this 

condition, immediately discontinue use and 

see your doctor.

 WARNING

Injuries may be caused, or aggravated, by 

prolonged use of a tool.  When using any 

tool for prolonged periods, ensure you take 

regular breaks.

4