Ryobi RLT36BS, Original Instructions Manual

2

■

Do not operate the product with damaged guards or 

without guards in place. 

■

Do not fit a metal replacement line.

■

Keep hands and feet away from the cutting means at all 

times and especially when turning on the motor.

■

Beware, the cutting means continue to rotate after the 

motor is turned off.

■

Beware of objects thrown by the cutting means. Clear 

debris like small stones, gravel, and other foreign 

objects  from  the  work  area  before  starting  operation. 

Wires or string may become entangled with the cutting 

means.

■

Turn off the product, and remove the battery pack. 

Make sure that all moving parts have come to a 

complete stop:

●

before servicing

●

before leaving the product unattended

●

before clearing a blockage

●

before checking, cleaning, and working on the 

product

●

before changing accessories

●

after striking a foreign object

●

whenever performing maintenance

●

whenever the product starts to vibrate abnormally

■

Wear full eye and hearing protection while operating the 

product. If working in an area where there is a risk of 

falling objects, head protection must be worn.

■

Hearing protection may restrict the operator’s ability 

to hear warning sounds. Pay particular attention to 

potential hazards around and inside the working area.

■

Wear heavy, long trousers, boots, and gloves. Do not 

wear loose fitting clothing, short trousers, jewellery of 

any kind, or use with bare feet.

■

Secure long hair so that it is above shoulder level to 

prevent entanglement in moving parts. 

■

The small blade fitted to the lawn guard is designed to 

trim the new extended line to the correct length for safe 

and optimum performance. It is very sharp; do not touch 

it, particularly when cleaning the product.

■

Always ensure that ventilation openings are kept clear 

of debris.

■

Before use and after any impact, check that there are 

no damaged parts. A defective switch or any part that is 

damaged should be properly repaired or replaced by an 

authorised service centre.

■

Make sure that the cutting head attachment is properly 

installed and securely fastened.

■

Make sure that all the guards, deflectors, and handles 

are properly and securely attached.

■

Do not modify the product in any way. This may 

increase the risk of injury to yourself or others.

■

Use only the manufacturer’s replacement cutting line. 

Do not use any other cutting attachment. 

■

Immediately turn off and remove the battery pack in 

the event of accident or breakdown. Do not operate 

the product again until it has been fully checked by an 

authorised service centre.

 WARNING

Ensure that the line cut-off blade in the guard is properly 

positioned and secured before each use.

ADDITIONAL BATTERY SAFETY WARNINGS

 WARNING

To reduce the risk of fire, personal injury, and product 

damage due to a short circuit, never immerse your 

tool, battery pack, or charger in fluid or allow a fluid to 

flow  inside  them.  Corrosive  or  conductive  fluids,  such 

as seawater, certain industrial chemicals, and bleach 

or bleach-containing product, etc., can cause a short 

circuit.

TRANSPORTATION AND STORAGE

■

Stop the product and allow it to cool down before 

storing or transporting. Do not store or transport the 

product with the battery pack fitted. Remove the battery 

pack and secure them separately.

■

Clean all foreign material from the product. Store it in a 

cool, dry, and well-ventilated place that is inaccessible 

to children. Keep the product away from corrosive 

agents such as garden chemicals and de-icing salts. 

Do not store outdoors.

■

For transportation in vehicles, secure the product 

against movement or falling to prevent injury to persons 

or damage to the product.

TRANSPORTING LITHIUM BATTERIES

Transport the battery pack in accordance with local and 

national provisions and regulations. Follow all special 

requirements on packaging and labelling when transporting 

batteries by a third party.
Ensure that no battery packs can come in contact with 

other batteries or conductive materials while in transport 

by protecting exposed connectors with insulating, non-

conductive caps or tape. Do not transport battery packs 

that are cracked or leaking. Check with the forwarding 

company for further advice.

MAINTENANCE

 WARNING

Use only original manufacturer’s replacement parts, 

accessories, and attachments. Failure to do so can cause 

possible injury, can contribute to poor performance, and 

may void your warranty.