Ryobi RP4205, Operator'S Manual

5 — English

FEATURES

PRODUCT SPECIFICATIONS

Power ........................................... 4V rechargeable battery
Operation Environment ................Temperature 23º- 104 Fº
Storage Temperature .................... Temperature -4º- 140 Fº
Camera Resolution ........................................... 300K pixels

Digital Zoom ....................................................................2X
LCD Screen Resolution ............................ 320 x 240 pixels
LCD Screen Size ....................................................... 2.7 in.
IP Rating .....................................................................IP52*

KNOW YO

UR INSPECTION SCOPE

See Figure 1, page 8.

The safe use of this product requires an understanding of 
the information on the tool and in this operator’s manual as 
well as a knowledge of the project you are attempting. Before 
use of this product, familiarize yourself with all operating 
features and safety rules.

AUTO POWER OFF

The inspection scope will automatically shut off when it has 
been unused for five minutes.

BATTERY / CHARGE INDICATOR

The indicator in the left corner of the screen indicates when 
the 4V battery pack is running low on charge.

CAMERA CABLE

When the camera on the end of the cable is pointed at an 
object, the image is shown on the 2.7 in. high-resolution 
LCD screen.

CAMERA LED

The inspection scope has a built-in light. This LED feature 
is convenient when working in close or tight areas where  
additional light is needed.

DIGITAL ZOOM

Go from a normal 1X view to 2X by pushing the digital zoom 
button. 

ROTATE BUTTON

With a press of the Rotate Button, the image can be flipped 
180°.

*IP Rating: Specifies the environmental protection the product enclosure provides. An IP Rating of 52 denotes protection against harmful 

deposits of dust and can withstand water spray from 

≤

 15 degrees from vertical. The water resistance rating applies to the camera and 

camera cable only. All other parts of the inspection scope are not water resistent and should not be submerged.

ASSEMBLY

UNPACKING

This product has been shipped completely assembled.



  Carefully remove the product and any accessories from 

the box. Make sure that all items listed in the packing list 
are included.

WARNING: 

Do not use this product if it is not completely assembled 
or if any parts appear to be missing or damaged. Use of 
a product that is not properly and completely assembled 
could result in serious personal injury.



  Inspect the product carefully to make sure no breakage 

or damage occurred during shipping.



  Do not discard the packing material until you have care-

fully inspected and satisfactorily operated the product.



  If any parts are damaged or missing, please call 

1-800-525-2579 for assistance.

PACKING LIST

Inspection Scope
Operator’s Manual

WARNING: 

If any parts are damaged or missing do not operate this 
product until the parts are replaced. Use of this product 
with damaged or missing parts could result in serious 
personal injury.

WARNING:

Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any 
such alteration or modification is misuse and could result 
in a hazardous condition leading to possible serious 
personal injury.

WARNING:

To prevent accidental starting that could cause serious 
personal injury, always remove the battery pack from the 
product when assembling parts.