Ryobi RP4205, Operator'S Manual

7 — English

MAINTENANCE

WARNING:

When servicing, use only identical replacement parts. 
Use of any other parts may create a hazard or cause 
product damage.

WARNING:

Always wear eye protection with side shields marked to 
comply with ANSI Z87.1 during maintenance. 

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most 
plastics are susceptible to damage from various types of 
commercial solvents and may be damaged by their use. Use 
clean cloths to remove dirt, dust, oil, grease, etc.

WARNING:

Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact 
with plastic parts. Chemicals can damage, weaken or 
destroy plastic which may result in serious personal injury.

STORAGE

Storage in a cool, dry location will prevent condensation or 
mold from forming inside the camera. 
Before storing, always remove the battery pack from the 
battery compartment.
Do not store the inspection scope at temperatures greater 
than 122º F (such as on a dashboard or vehicle interior).

BATTERY PACK PREPARATION FOR 
RECYCLING

WARNING:

Upon removal, cover the battery pack’s terminals with 
heavy-duty adhesive tape. Do not attempt to destroy or 
disassemble battery pack or remove any of its compo-
nents. Lithium-ion batteries must be recycled or disposed 
of properly. Also, never touch both terminals with metal 
objects and/or body parts as short circuit may result. 
Keep away from children. Failure to comply with these 
warnings could result in fire and/or serious injury.

NOTE: FIGURES (ILLUSTRATIONS) START ON PAGE 8  

AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.