10 — English
To remove:
Unlock and open the battery cover.
Locate the latch on the bottom of the battery pack and
depress to release the battery pack.
WARNING:
Battery tools are always in operating condition. Therefore,
switch should always be locked with hands free of the
lock-out button when not in use. Remove battery pack
when transporting or carrying the tool to avoid accidental
starting, which may result in serious injury.
For complete charging instructions, see the operator’s manu-
als for your battery pack and charger.
STARTING AND STOPPING THE POWER
CLEANER
See Figure 9.
DANGER:
Improper application of cleaning solution can result in
SEVERE INJURY or DEATH. Follow CDC and EPA guide-
lines for cleaning.
WARNING:
Risk of fire or explosion. Spray area must be well-
ventilated and away from sparks or flames.
WARNING:
Hold the power cleaner securely with both hands. Expect
the power cleaner to move when the trigger is pulled due
to reaction forces. Failure to do so could cause loss of
control and injury to yourself and others.
NOTE: Never place or immerse the unit in standing water.
To start:
Connect the garden hose or submerge filtered end of
siphon hose into water source.
Install the battery pack.
Place the lock-out button in the unlocked position.
Squeeze and hold the trigger to operate.
APPLICATIONS
You may use this product for the purpose of cleaning objects
like the examples listed below:
Patio furniture, windows, automobiles, boats, or RVs
TO INSTALL/REMOVE BATTERY PACK
See Figures 7 - 8.
WARNING:
Always remove battery pack from your tool when you are
assembling parts, making adjustments, cleaning, or when
not in use. Removing battery pack will prevent accidental
starting that could cause serious personal injury.
To install:
Open the battery cover by releasing the latch and opening
the cover.
Place the battery pack in the product. Align the raised rib
on the battery pack with groove in the battery port.
WARNING:
Make sure the latch on the bottom of the battery pack
snaps in place and the battery pack is fully seated and
secure in the battery port before beginning operation.
Failure to securely seat the battery pack could cause the
battery pack to fall out, resulting in serious personal injury.
NOTICE:
When placing battery pack in the tool, be sure raised rib
on battery pack aligns with the bottom of the tool and
latches into place properly. Improper installation of the
battery pack can cause damage to internal components.
Close the battery cover and fasten the latch to secure
the cover.
WARNING:
Do not use the power cleaner unless the battery cover is
fully closed and latched. NEVER allow water or chemicals
to enter the battery compartment.
OPERATION
