Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed.
Use of the power tool for operations
different from those intended could result in a hazardous
situation.
Keep handles and grasping surfaces dry, clean
and free from oil and grease.
Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
BATTERY TOOL CARE AND USE
Recharge only with the charger specified by the
manufacturer.
A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
Use power tools only with specifically designated
battery packs.
Use of any other battery packs may
create a risk of injury and fire.
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
or a fire.
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help.
Liquid ejected from
the battery may cause irritation or burns.
Do not use a battery pack or tool that is damaged or
modified.
Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or
risk of injury.
Do not expose a battery pack or tool to fire or
excessive temperature.
Exposure to fire or temperature
above 130°C may cause explosion.
Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions.
Charging
improperly or at temperatures outside the specified
range may damage the battery and increase the risk of
fire.
SERVICE
Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This
will ensure that the safety of the power tool is maintained.
Never service damaged battery packs.
Service
of battery packs should only be performed by the
manufacturer or authorised service providers.
CORDLESS HEDGE TRIMMER SAFETY
WARNINGS
Keep all parts of the body away from the blade. Do
not remove cut material or hold material to be cut
when blades are moving.
Blades continue to move
after the switch is turned off. A moment of inattention
while operating the hedge trimmer may result in serious
personal injury.
Carry the hedge trimmer by the handle with the
blade stopped and taking care not to operate any
power switch.
Proper carrying of the hedge trimmer will
decrease the risk of inadvertent starting and resultant
personal injury from the blades.
When transporting or storing the hedge trimmer,
always fit the blade cover.
Proper handling of the
hedge trimmer will decrease the risk of personal injury
from the blades.
When clearing jammed material or servicing the unit,
make sure all power switches are off and the battery
pack is removed or disconnected.
Unexpected
actuation of the hedge trimmer while clearing jammed
material or servicing may result in serious personal
injury.
Hold the hedge trimmer by insulated gripping
surfaces only, because the blade may contact
hidden wiring.
Blades contacting a live wire may
make exposed metal parts of the hedge trimmer live
and could give the operator an electric shock.
Keep all power cords and cables away from cutting
area.
Power cords or cables may be hidden in hedges or
bushes and can be accidentally cut by the blade.
Do not use the hedge trimmer in bad weather
conditions, especially when there is a risk of
lightning.
This decreases the risk of being struck by
lightning.
ADDITIONAL SAFETY WARNINGS
Do not attempt to cut stems or twigs that are larger
than 26 mm thick for RY18HTX60A or 24 mm thick for
RY18HT55A, or are obviously too large to feed into the
cutting blade. Use a non-powered hand saw or pruning
saw to trim large stems.
While operating the product, always hold it firmly with
both hands by the two handles.
The product must be used only at ground level and not
on any other unstable support.
Inspect the product before each use. Check for loose
fasteners, etc. Make sure that all guards and handles are
properly and securely attached. Replace any damaged
parts before use. Check for battery pack leaks.
Do not operate the product in poor lighting. The operator
requires a clear view of the work area to identify potential
hazards.
Check the hedges and bushes for foreign objects, such
as wire fences and hidden wiring.
The use of hearing protection reduces the ability to hear
warnings (shouts or alarms). The operator must pay
extra attention to what is going on in the working area.
Turn off the product, remove the battery pack, and allow
both to cool down. Make sure that all moving parts have
come to a complete stop:
before adjusting the working position of the cutting
means
before servicing
before clearing a blockage
before checking, cleaning, or working on the product.
before changing accessories
before leaving the product unattended
before checking for damage after striking a foreign
object
before performing maintenance
whenever the product starts to vibrate abnormally
Do not force the product through heavy shrubbery. This
can cause the blades to bind and slow down. If the
blades slow down, reduce the pace.
4
Original Instructions
