background image

  Introduction .......................................................................................................................................................................

  Important Safety Instructions ............................................................................................................................................3

  Specific Safety Rules.........................................................................................................................................................4

 

Symbols ......................................................................................................................................................................... 5-6



  Features ......................................................................................................................................................................... 7-8



  Assembly ..................................................................................................................................................................... 9-1

  Operation ................................................................................................................................................................... 1-15

  Maintenance .............................................................................................................................................................. 16-18

  Troubleshooting ...............................................................................................................................................................19

  Warranty .................................................................................................................................................................... 1-5

  Parts Ordering / Service ..................................................................................................................................................6

TABLE OF CONTENTS

INTRODUCTION

This tool has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability have 
been given top priority in the design of this product making it easy to maintain and operate.

IMPORTANT INFORMATION ON THE ENGINE wARRANTy OF THIS PRODUCT can be obtained by contacting:

Robin America, Inc. (a division of Fuji Heavy Industries, Ltd.)

Wood Dale, Illinois

1-630-350-800

www.robinsubaru.com

Summary of Contents for RY80030A



























Reviews: