Ryobi RYi1802B6, Operator'S Manual

9 — English

UNPACKING

This product has been shipped completely assembled.



  Carefully remove the product and any accessories from 

the box. Make sure that all items listed in the 

Packing 

List 

are included.

  WARNING:

Do not use this product if it is not completely assembled 
or if any parts appear to be missing or damaged. Use of 
a product that is not properly and completely assembled 
could result in serious personal injury.



  Inspect the product carefully to make sure no breakage 

or damage occurred during shipping.



  Do not discard the packing material until you have carefully 

inspected and satisfactorily operated the product.



 If any parts are damaged or missing, please call 

1-800-525-2579 for assistance.

ASSEMBLY

PACKING LIST

Power Station
Protective Cover
Charger Cord and Adaptor
Operator’s Manual

  WARNING:

If any parts are damaged or missing do not operate this 
product until the parts are replaced. Use of this product 
with damaged or missing parts could result in serious 
personal injury.

  WARNING:

Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any 
such alteration or modification is misuse and could result 
in a hazardous condition leading to possible serious 
personal injury.

OPERATION

  WARNING:

Do not use any attachments or accessories not 
recommended by the manufacturer of this product. The 
use of attachments or accessories not recommended 
can result in serious personal injury.

NOTICE:

Before each use, inspect the entire product for damaged, 
missing, or loose parts such as screws, nuts, bolts, caps, 
etc. Tighten securely all fasteners and caps and do not 
operate this product until all missing or damaged parts 
are replaced. Please contact customer service or a quali-
fied service center for assistance.

APPLICATIONS

This product is designed to supply electrical power for 
operating compatible electrical lighting, appliances, tools, 
and motor loads.

SPECIAL REQUIREMENTS:

There may be General or State Occupational Safety and 
Health Administration (OSHA) regulations, local codes or 
ordinances that apply to the intended use of the product.  
Please consult a qualified electrician, electrical inspector, or 
the local agency having jurisdiction:

  WARNING:

Risk of electric shock. When using a grounded appli-
ance, this tool will not provide an electrical path to earth 
ground. Do not power devices with damaged or frayed 
power cords.

  WARNING:

If this product will be used 

only

 with cord and plug-

connected equipment, National Electric Code does not 
require that the product be grounded. This product is not 
suitable for any application that requires the product to 
be grounded. Consult a qualified electrician, electrical 
inspector, or local agency having jurisdiction for local 
codes or ordinances to find out if grounding is needed 
in your situation before using the product. 

  WARNING:

Do not allow familiarity with this product to make you 
careless. Remember that a careless fraction of a second 
is sufficient to inflict serious injury.