Ryobi XIW-3100, Owner'S Operating Manual

4

This tool is started and stopped by depressing and releasing 

the trigger (3).
The tool speed is variable from 0 through 2,200min

-1

 by 

controlling the trigger-squeezing force.

Insert the hex portion of the socket into the drive shank (1).

This tool is equipped with a LED work light (2) to illuminate the 

tip of a bit. The light turns on by depressing the trigger.

1. Drive shank
2. LED work light
3. Trigger
4. Forward/Reverse switch
5. Battery clip
6. Battery pack (Not included)

1. Make sure that the tool is only connected to the voltage

    marked on the name plate.
2. Never use the tool if its cover or any bolts are missing. If

    the cover or bolts have been removed, replace them 

    prior to use.
    Maintain all parts in good working order.
3. Always secure the tool when working in elevated

    positions.
4. Never touch the blade, drill bit, grinding wheel or other  

    moving parts during use.
5. Never start the tool when its rotating component is in    

    contact with the work piece.
6. Never lay the tool down before its moving parts have 

    come to a complete stop.
7. 

ACCESSORIES: 

The use of accessories or attachments

    other than those recommended in this manual might 

    present a hazard.
8. 

REPLACEMENT PARTS:

 When servicing use only 

    identical replacement parts.

1. Be aware that since this tool does not have to be plugged 

    into an electrical outlet, it is always in operating condition.
2. First, charge the battery.
3. Be sure the battery holder is securely snapped in place.
4. When not in use, lock the trigger.
5. When operating at high places, be aware of things below

    you.
6. Make sure that the bit is securely mounted. An incorrectly

    mounted bit is extremely dangerous since it can fly off or 

    break during operating.
7. Do not wear cloth gloves or a necktie since they could 

    become caught in a rotating bit.
8. Hold the tool securely.
9. Never touch the metal body parts when fastening walls,   

    floors, or other surfaces covering electrical wiring.

    Hold the tool only by the plastic handle to prevent electric

    shocks.

INSTRUCTIONS FOR SAFE HANDLING

CORDLESS IMPACT WRENCH SAFETY 

PRECAUTIONS

Li-ion batteries must be recycled.

Take the battery to the shop from which it was purchased as 

soon as the post-charging battery life becomes too short for 

practical use.

Do not discard the exhausted battery.

DISPOSAL OF THE EXHAUSTED BATTERY

DESCRIPTION

Drive shank size .................................................. 1/2” Hex.
Fastening capacity...................................... M14 - M32 bolt
Max.fastening torque ............................................ 310N.m
Motor ..................................................................... DC18V
No load speed .............................................. 0-2,200 min

-1

Impact per minute ......................................... 0-3,000 min

-1

Net weight (not incl. battery pack) ......................... 1.7 Kg

SPECIFICATIONS

COMPATIBLE BATTERY PACK AND CHARGER

TRIGGER (Fig. 1)

To change the direction of rotation, stop the tool by releasing 

the trigger and push the forward/reverse switch (4) to the 

opposite side. When the reversing switch is set to the “R” 

mark, the direction of rotation will be clockwise when viewed 

from the handle end of the drill. When the reversing switch is 

set to the “L” mark, the direction of rotation will be 

counter-clockwise.

The trigger can be locked by positioning the reversing switch 

at the center. Lock the trigger whenever the tool is not in use.

Since the suitable tightening torque varies with the material, 

size, and condition of the material into which objects are 

tightened, use a tightening time which is appropriate for the 

work conditions. Since bolts may be stretched or broken if the 

tightening time is long, confirm the tightening time and 

tightening torque before starting the work.
The tightening torque varies with the condition of the battery 

pack. Since the striking force will become weaker, the striking 

times will become fewer, and the tightening torque will 

suddenly drop if the battery pack is on the verge of complete 

discharge, recharge the battery pack at regular intervals.

FORWARD/REVERSE SWITCH (Fig.1)

LED WORK LIGHT (Fig.1)

Hex socket (Type : Quick change)
(Mounting)

To remove the socket, simply pull it off.

((Removing))

MOUNTING AND REMOVING THE SOCKET 

(Fig. 2)

TIGHTENING TORQUE

BATTERY PACK (not included) ...... XB-1500, XB-3000
CHARGER (not included) ............... XPP-2700