22
PARTS LIST
—PARTS ORDERING INFORMATION
PARTS LIST
PARTS ORDERING INFORMATION
How to Order Parts
1. Identify the parts required by referring to the
following pages for part numbers and part
descriptions, bolts.
2. To place an order, contact your local Rytec
representative or the Rytec Customer Support
Department at: 800-628-1909 or 262-677-2058
(fax).
3. To ensure the correct parts are shipped, please
include the door
’s serial number with the order.
To locate the
door’s serial number refer to the
“DOOR SERIAL NUMBER” section on page 1.
Figure 47
Substitute Parts
Due to special engineering and product
enhancement, the actual parts used on your door
may be different from those shown in this manual.
Also, if a part has been improved in design and bears
a revised part number, the improved part will be
substituted for the part ordered.
Return of Parts
Rytec will not accept the return of any parts unless
they are accompanied by a Return Merchandise
Authorization (RMA) form.
Before returning any parts, you must first contact the
Rytec Customer Support Department to obtain return
authorization and an RMA form.
DOOR SERIAL NUMBER
Each RYTEC door is uniquely identified with a serial
number. You will need this when contacting RYTEC
for any service.
To obtain your door’s DOOR SERIAL
NUMBER, there are several typical locations where
the
DOOR SERIAL NUMBER
can be found; on the
cover of the RYTEC System 4 control panel, the front
side outside edge of each door panel at
approximately eye level, and the drive motor/head
assembly. (See Figure 1)
IMPORTANT: When installing multiple doors of
the same model, verify and match
the serial number of the control
panel with those on all the other
components of each door
assembly. Failure to do this will
void the manufacturer’s warranty
and may lead to catastrophic
failure and/or personal injury!
Head
Assembly
Insulated
Rytec Door
Panels
RYTEC
System 4
Control
Panel
Fused
Disconnect
Photo eyes
Stay
Rollers
Bi-Parting Door
