6K V2.0 12-14-01
182
Set Clock and Calendar
Sets the clock and calendar.
·
Enter all parameters shown below each time that you set the
Clock and
Calendar.
·
All parameters consist of two digits except the day-of-week, which is one
digit.
·
The year parameter is needed for leap year correction.
·
The clock and calendar is set when you release the (*) button.
·
Seconds are automatically set to 00.
Command Form:
Command
Form
Data Digit
Set Clock and Calendar
(PW) 25 (year,
month, day-of-month,
day-of-week, hour,
minute)*
from table below
Data Digit
Explanation
00-99
year
01-12 (January is 01)
month
01-31
day-of-month
0-6 (Sunday is 0)
day-of-week
00-23 (24-hour format)
hour
00-59
minute
Acknowledgment:
Sends OK
Errors:
Error
Meaning
? err 1
wrong number of digits entered
? err 2
illegal parameter:
any lettered key;
month = 00 or greater than 12;
day-of-month = 0 or greater than 31;
day-of-week greater than 6;
hour greater than 23;
minute greater than 59.
Default Condition:
00:00:00 on W ednesday, January 1, 1993.
