7
4 Installation
4 Installation
4.1 Mounting the filter rack
For filters mounted on the Solo Rescue –
go to section 4.1.1
For wall mounted filters – go to section 4.1.2
(Option, accessory needed)
4.1.1 Mounted on the Solo Rescue
®
NOTE
: Not applicable for Solo Rescue® 32-series,
use wall mount accessory instead. See section 4.1.2.
1. Unscrew the bolt holding the top cover on the
right side of the Solo Rescue® (Fig. 1)
2. Position the filter rack pins in the holes as
displayed in (Fig. 2)
3. Fasten the previously unscrewed bolt to fix the
filter rack on the Solo Rescue® (Fig. 3)
Figure 1
Figure 2
Figure 3
