SR700 Particle PAPR — How to
Copyright © 2013 by The S.E.A. Group
3
BATTERY TIPS:
•
Always recharge battery BEFORE it is
completely drained
•
Don’t try to recharge other batteries
•
Don’t use any other chargers
•
Recharge the battery indoors
•
The equipment becomes hot — do not
cover battery or charger during recharge
•
Keep battery and charger away from
liquids and moisture
•
Prevent short circuits by contact with
metal objects
•
Don’t take battery apart
•
Keep battery away from naked flame:
risk of explosion
…assemble the SR700 PAPR
Place the fan unit upside-down. Fit the three
tongues in one of the belt attachments into the
slots in the fan unit. Continue pushing the
attachment until it snaps into place. Repeat with
the other belt attachment on the opposite side.
Do not get left and right mixed up. Make sure
the plastic ‘wings’ are curved downwards with
the fan unit upside-down, as shown in the
picture.
Head pieces come with their own breathing
hose.
•
Make sure the O-ring at the tip of the
hose is intact.
•
Insert the hose into the hole in the fan
unit, fitting the two protruding lugs into
the corresponding slots of the bayonet
fitting.
•
Turn the hose clockwise until it locks
securely.
If using the SR700 with the SR200 full face mask,
screw the threaded end of the hose into the
front of the face piece.