SR700 Particle PAPR — How to
Copyright © 2013 by The S.E.A. Group
4
…attach UNTHREADED particle
filters to the SR700
Make sure you are using particle filters only.
Prefilters MUST be used.
If uncertain how to use filters, see the training
module on Sundström filters.
You will need two filter adapters.
With even pressure using both hands, squeeze
the particle filter into the filter adapter until it
snaps into place. Repeat with the other filter
adapter.
NOTE: the filters in both filter adapters must be
IDENTICAL! You must not use different filters or
filter combinations.
Place a prefilter on each particle filter and secure
it with a prefilter holder.
Screw in the two assembled filters into the fan
unit.
…remove filters from adapters
Insert a coin or similar between the filter rim and
the filter adapter and twist the two apart.
…attach THREADED filters
Screw two identical filters directly into the fan
unit.