SR700 Particle PAPR — How to
Copyright © 2013 by The S.E.A. Group
8
When the air block is released, all alarms should
stop after about 15 seconds.
…wear the SR700 Particle PAPR
The fan unit should sit on the small of your back.
If using a headpiece, let the breathing hose run
straight up your back without kinks or bends.
If using the SR200 full face mask, run the
breathing hose around your waist and up along
your chest.
…clean the SR700 Particle PAPR
For normal cleaning and disinfection, use
Sundström’s cleaning tissues.
Alternatively, use a mild detergent and water
and wipe the regulator all over with a soft cloth
or sponge. Warm water may give a better clean.
Leave to dry and store in a dry, clean area at
room temperature away from direct sunlight.