S.E.P. SUPER SMART, User Manual

11

 WARNING 

A safety device does not permit reverse speed to be 
engaged when the PTO is operating (rotary tilling) 

Power Take Off (PTO) control lever (two-

wheel tractor configuration) 

CAUTION 

When using the machine as a motor mower, the han-
dlebars must be rotated through 180. The gear selec-
tor and PTO control levers therefore interchange posi-
tion. See page 12 for details  

The Power Take Off (PTO) control lever engages the 
drive to the attachment. 
To engage and disengage drive, proceed as follows 
(see fig. 7): 

a.  Turn throttle lever (1) to idle position. 
b.  Pull up clutch lever (2). 
c.  Pull PTO control lever (3) and release it when drive 

is engaged (see plate in detail A.) 

  The lever (3) has two positions: 

− 

1

: power take-off operating. 

− 

0

: power take-off stopped. 

d.  Release the clutch lever while accelerating the en-

gine. 

CAUTION 

The clutch lever must be released slowly to prevent 
damage to the drive. Do not start working with at-
tachment loaded (into the soil). 

 WARNING 

A safety device prevents you from using the rotary til-
ler attachment in reverse gear. Do not use the two-
wheel tractor if this safety device is not correctly in-
stalled. 

Handlebar vertical lock release lever 

(See fig. 4, item 4) 
This allows the handle to be vertically adjusted to suit 
driving comfort and tilling depth. 
Simply push down lever (1) to release handles. 

Handlebar sideway lock release lever 

(See fig. 4, item 5) 
By releasing lock lever (5), you may rotate the han-
dlebars for the use of front mounted attachments. 

PTO Instant adaptor 

This allows attachments to be coupled and de-
coupled quickly and easily to and from the PTO. The 
lever (fig. 8, item 1) has two positions. 

− 

Free position: pull the lever (1) outwards and lock 
in this position by turning it 90°. 

− 

Locked position: turn the lever (1) 90°; if the cou-
pling with the attachment is correct, the lever will 
automatically return to its original position, thereby 
locking the attachment. 

See page 13 for instructions on how to fit the attach-
ments. 

CONTROLS OF FRONT-MOUNTED  
ATTACHMENTS 

When the machine is used with front-mounted at-
tachments, the gear and the PTO levers are reversed