background image

 

  STARTING THE ENGINE 

 

Disengage all control levers before starting the mo-

tor. Keep your feet clear of the attachments fitted to 

the two-wheel tractor. 

 

Do not run the engine in a closed ambient where 

the exhaust gases can collect. They contain car-

bon monoxide that is highly toxic. 

 

Do not interfere with safety device (engine shut-

off). Do not use the two-wheel tractor if this safety 

device is missing or defective. 

 

OPERATING OF THE 
TWO-WHEEL TRACTOR 

 

Make sure that you know how to stop the engine in 
an emergency. Familiarize yourself with the con-
trols and learn how to use your two-wheel tractor 
correctly. 

 

Do not allow children or inexperienced people to 
operate it. 

 

Do not use your two-wheel tractor in proximity of 
other people, and in particular of children. Do not 
use it close to animals. Bear in mind that you are 
responsible for any damage or injury caused to 
people or things. 

 

Do not use the rotary tiller attachment without its 
protection hood and guards. 

 

Use your two-wheel tractor only in daylight or with 

good artificial lighting. Operate it at walking pace. 

Do not run. 

 

Take particular care on slopes; operate only under 

safe and stable conditions. Do not work uphill or 

downhill; move across the slope instead. Take spe-

cial care when turning. 

 

For obvious reasons, never work on slopes steeper 

than 30°. 

 

To ensure that gasoline fuelled engines are cor-

rectly lubricated, avoid working for long periods on 

slopes steeper than 20°. 

 

Do not operate the two-wheel tractor if hoods or 
other safety devices are missing or defective. 

 

Keep your hands and feet clear of all attachments. 

 

Do not lift or transport your two-wheel tractor with 

the engine running. 

 

Inspect the ground before you start working. Clear 
it from stones, wood, wires and any other foreign 
objects. 

  OPERATING OF ATTACHMENTS 

 

Check that the attachment coupled to the PTO 

functions correctly before starting the motor. 

 

Never use attachments coupled to the PTO in prox-

imity of children or animals. 

 

Keep your hands and feet well clear of the attach-

ment coupled to the PTO. 

 

Before using an attachment, make sure that the 

reverse speed safety device

 has been set as re-

quired (this can be used when the front-mounted 

attachments are fitted, and not when the tiller is ro-

tating). 

 

When a front-mounted attachment is installed, the 

handlebars are rotated through 180°, hence the 

gear and PTO levers are reversed. 

 

The manufacturer waives any responsibility arising 

from improper use of the safety device. 

 

 

Maximum

Recommended

20°

OK

45°

MF2037-2

 

 MAINTENANCE 

 

Stop the engine and disconnect the spark plug 

lead: 

 

before checking or repairing your two-wheel 

tractor; 

 

in case of excessive vibrations (investigate 

cause immediately). 

 

Stop the engine before leaving your two-wheel 
tractor or adjusting attachments. 

 

Periodically check that all nuts and bolts are tight. 

 

Do not leave your two-wheel tractor in closed am-

bients with fuel in the tank. Fuel vapor is a potential 

source of danger. 

Summary of Contents for SUPER SMART





























Reviews: