INST
ALL
A
TION
MAN
UAL
| Caution |
| Caution |
Do not touch or give shocks to the
Junction box as well as front and
rear surface of module, and do not
remove the label.
| Caution |
Do not touch with wet hands or
equipment, which can result in
electric shock.
Environmental considerations
|Recommendation|
| Caution |
Do not scratch by a sharp tool on the
module frame and surface.
Abrasion of the coated surface may lead to
oxidize frames or reduce their strength.
The scratch of the surface may be the main
cause of the module output degradation
and decrease in strength.
The front surface of the module shall not
be exposed to sunlight artificially.
[It can cause performance degradation due
to solar cell degradation]
The shading of the front surface is the main cause of hot
spot or performance reduction of power generation.
The ground should have well drained soil.