Page 13 / 60
SISE_M_REGUL_Serie M_MV3-IM_MV3-TS_V7.3_20200108_B_En
www.sise-plastics.com
2.3.2)
C
hanging the number of zones displayed
It is possible to zoom in or out so as to display more or fewer zones. This allows an overall view of
the system showing fewer details for each zone, or alternatively to view more information of a smaller
number of zones.
The various zoom levels depend on the screen set up on the system:
•
7" landscape-oriented screen: 48, 24, 16, 12 or 8 zones can be displayed at once.
•
10" and 15" portrait screens: 96, 72, 48, 24 or 16 zones can be displayed at once.
The zoom level can be changed in either of two ways: either by swiping diagonally upwards to zoom in
(displaying fewer zones) and diagonally downwards to zoom out (displaying more zones), or by using
the navigation icon
in the Action bar.
2.3.2.1)
Z
oom in or out by swiping
Zoom in
Zoom out
The number of zones currently displayed is shown in the status bar. If the system is capable of managing
more zones than the number currently displayed, you can navigate around the zones displayed by
swiping upwards or downwards. There is a position indicator on the right-hand side of the window giving
further information on the scrolling of the zones.
Number of zones which can be displayed
and number of zones currently displayed
Scroll
Bar
Towards
zone 1
Towards
the last
zone