Page 37 / 60
SISE_M_REGUL_Serie M_MV3-IM_MV3-TS_V7.3_20200108_B_En
www.sise-plastics.com
3.2.2)
H
eating zone management
3.2.2.1)
"Q
uick change" action bar
Various frequent actions can be carried out directly from the "Control" screen as well as in the zone
con
fi
guration screen.
To do this, select one or more zones (§2.3.3).
The
,
,
,
and
(§
additional buttons are displayed in the Action bar.
Icon
Action
Activate/deactivate selected zones (§3.1.2.3)
Toggle selected zones between manual and automatic mode (§3.1.2.3)
Raise/lower setpoint of selected zones in stages.
Give access to the zone con
fi
guration screen (§3.1.2.3)
Activate Boost on selected zones (§3.1.2.3)
Increasing/decreasing setpoint:
Upon pressing the
g
icon, the following sub-menu bar is displayed:
Press the
to
buttons
to raise or lower the setpoints of
the selected zones by the values
written on the buttons in °C or °F if
the zones are in automatic mode,
or in % if the zones are in manual
mode.
