background image

6 - LM10 INSTRUCTION MANUAL

STANDING USE
Descent
Before accessing the mobile platform, make sure that the lift is in the up position. If necessary, 
push the up button until the platform is in its highest position. Once on the platform, ensure 
stability using the railings located on each side of the platform. Before descending, inspect the 
area to ensure that no pool users are near or under the lift. To control the descent, press the down 
arrow button located on the side of the railing.  To stop the mobile platform at the desired level, 
simply release the control button.

Ascent
The platform can be accessed within the pool with help of the railings and/or carer. Before 
operating the lift, check that no pool users are near the platform area. To control the ascent, press 
the arrow button at the top of the button box located on the side of the railing. Once the platform 
has reached the high position, the user can exit the pool.

IN POOL WHEELCHAIR USE
Descent
Before accessing the mobile platform, make sure that the lift is in the up position. If necessary, 
push the up button until the platform is in its highest position. Once on the platform, ensure 
stability using the railings located on each side of the platform. Once the chair is on the movable 
platform, ensure brakes are locked in and the side elastic cords on both sides of the armrests are 
attached. Before descending, inspect the area to ensure that no pool users are near or under the 
lift. To control the descent, press the down arrow button located on the side of the railing. To stop 
the mobile platform at the desired level, simply release the control button. 

Ascent
The platform can be accessed within the pool with help of the railings and/or carer. Before 
operating the lift, check that no pool users are near the platform area. Once the chair is on the 
movable platform, ensure brakes are locked in and the side elastic cords on both sides of the 
armrests are attached. To control the ascent, press the arrow button at the top of the button box 
located on the side of the railing. Once stopped at the high level, detach the elastic cords, release 
the brake from the chair and move backwards to exit the platform.

USE OF THE LM10

The LM10 must always be used under the 
supervision of an authorised person. The lift can 
be operated by the user while standing on the 
platform or sitting in a wheelchair dedicated to 
this use. 

OPERATIONAL GUIDELINES

SR Smith Mobile Aquatic Chair • product code: AC0000

Summary of Contents for LM10













Reviews: