创新科技
速瑞达造
Innovated By S-RIDE
3. Installation and adjustment
：
Slide the shifter onto the handlebar.
Rotate the shifter until the barrel adjuster
is above the brake lever.
Figure (1)
Figure (2)
Tighten the 2.5 mm hex clamp bolt to
15 in.lbs. (1.7 Nm).
Figure (3)
Slide the stationary grip onto the
handlebar.
Feed the cable through the cable housing
and stops. Make sure the shifter is in gear
position “1“ (front shifter) or the highest
gear number (rear shifter).
Attach the front/rear shifter cable to the
front /rear derailleur.
Adjust indexing per derailleur instructions.
（
This figure is viewed from the bottom up
）
2
